PS325

Service Bulletin Details

Public Details for: PS325

Pitstop: slight variation in the ?Set? Speed after setting cruise control - a few customers have complained about their vehicle briefly accelerating beyond the set cruising speed and then slowing down to the "set" speed. This article addres


- 2015 - 2014 - 2013 - 2012 - 2011 -

Models from 2015
2015 KIA OPTIMA HYBRID
Models from 2014
2014 KIA OPTIMA HYBRID
Models from 2013
2013 KIA OPTIMA HYBRID
Models from 2012
2012 KIA OPTIMA HYBRID
Models from 2011
2011 KIA OPTIMA HYBRID 
SUBJECT:
GROUP
Body Electrical
MODEL
Optima Hybrid
(TF HEV)
NUMBER
PS325
DATE
June 2014
SLIGHT VARIATION IN THE “SET” SPEED AFTER
SETTING CRUISE CONTROL
A few customers have complained about their vehicle briefly accelerating beyond the set
cruising speed and then slowing down to the "set" speed. If that occurs, check the G/Yaw
sensor to determine if it is registering an uphill or flat road condition. If it is indicating an uphill
setting, the vehicle’s G/Yaw sensor needs to be recalibrated. To correct this condition, place the
vehicle on level ground and access GDS > Brakes ABS ESC > Option Treatment > Longitudinal
G Sensor Calibration (HAC/DBC Only) to calibrate the sensor.
Page 1 of 1

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.