TT040

Service Bulletin Details

Public Details for: TT040

Tech tip: dtcs poc17 and P1C76 not clearing - perform the motor/hsg resolver calibration located in the s/w management section of the ?Motor control unit? (mcu) system.


- 2014 - 2013 - 2012 - 2011 -

Models from 2014
2014 KIA OPTIMA HYBRID
Models from 2013
2013 KIA OPTIMA HYBRID
Models from 2012
2012 KIA OPTIMA HYBRID
Models from 2011
2011 KIA OPTIMA HYBRID 
TECH TIP: DTCs POC17 and P1C76 not clearing
NUMBER: TT040
MODEL: Optima Hybrid (All)
DATE: 01/13/2014
Symptom: Replaced HPCU results in two codes that will not clear: P0C17
(Drive motor “A” position sensor not learned) and P1C76
(Generator position sensor not learned).
Repair: Perform the motor/HSG resolver calibration located in the S/W
management section of the “Motor Control Unit” (MCU) system.
Note: Tech Tips are not a substitute for proper diagnosis.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.