K410NAS1
Service Bulletin Details
Public Details for: K410NAS1
Situation: an issue has been identified on a limited number of vehicles within the listed affected vehicle range where the evaporative emission canister hose may show signs of ozone cracking.
Models from 2017
2017 JAGUAR F-TYPE |
2017 JAGUAR XE |
2017 JAGUAR XF |
Models from 2016
2016 JAGUAR F-TYPE |
2016 JAGUAR XF |
2016 JAGUAR XJ |
Models from 2015
2015 JAGUAR F-TYPE |
2015 JAGUAR XF |
Models from 2014
2014 JAGUAR XF |
Page 1 of 26 TECHNICAL BULLETIN K410NAS1 01 NOV 2016 © Jaguar Land Rover North America, LLC NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar service facility to determine whether this bulletin applies to a specific vehicle. SECTION: 303-00 Service Action: Carbon Canister Hose Ozone Cracking AFFECTED VEHICLE RANGE: F-TYPE (X152) Model Year: VIN: Assembly Plant: 2015-2017 K15429-K39932 XE (X760) Model Year: VIN: Assembly Plant: 2017 923958-953582 XF (X260) Model Year: VIN: Assembly Plant: 2016-2017 Y00070-Y33900 XF (X250) Model Year: VIN: Assembly Plant: 2014-2015 U24391-U88782 XJ Range (X351) Model Year: VIN: Assembly Plant: 2016 V90868-W00765 V6 S/C 3.0L Petrol Castle Bromwich GTDi 2.0L Petrol/V6 S/C 3.0L Petrol Solihull GTDi 2.0L Petrol/V6 S/C 3.0L Petrol Castle Bromwich V6 S/C 3.0L Petrol Castle Bromwich V6 S/C 3.0L Petrol Castle Bromwich MARKETS: NAS CONDITION SUMMARY: Situation: An issue has been identified on a limited number of vehicles within the listed Affected Vehicle Range where the evaporative emission canister hose may show signs of ozone cracking. Action: Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the Service Instruction detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI) process but must have it completed prior to vehicle handover to the customer. Affected vehicles already in the hands of customers should be updated at the next available opportunity. PARTS: NOTE: Order only the expected percentage demand of parts identified. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 2 of 26 DESCRIPTION PART No./SUNDRY CODE QTY./VALUE EXPECTED % of VEHICLES REQUIRING PARTS Hose - F-TYPE (X152) T2R11439 1 100 Hose - XE (X760), XF (X260) T2H6976 1 100 Hose - XF (X250) C2Z29122 1 100 Hose - XJ (X351) C2Z29121 1 100 SPECIAL TOOLS: Refer to Workshop Manual/Service Instruction for any required special tools WARRANTY: NOTE: Check DDW to ensure that a vehicle is affected by this program prior to undertaking any rework action. At the time of confirming a booking for vehicle repair, ensure that all outstanding Recalls and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit. Warranty claims must be submitted quoting Program Code 'K410', Option Code 'X', and the relevant SRO and parts information. The SRO that allows for the drive in / drive out allowance can only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken. This program is valid for a limited time only. Warranty claims with a repair date prior to the 31 October 2018 closure date must be submitted or payment within 30 calendar days of completion of the repair. Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair time. DESCRIPTION SRO Secondary evaporative emission canister hose removal for access - F-TYPE(X152; Coupe) 17.15.56 TIME (HOURS) 0.90 Secondary evaporative emission canister hose removal for access - F-TYPE(X152; Folding 17.15.56.99 0.60 top) Secondary evaporative emission canister hose removal for access - XE (X760), XF (X260) 17.15.56 0.40 Secondary evaporative emission canister hose removal for access - XJ (X351), XF (X250) 17.15.56 0.30 Secondary evaporative emission canister hose with removed access - Renew - All 17.15.57 0.10 Read and Clear DTC - All 86.99.78 0.20 Drive in/drive out - All 10.10.10 0.20 Normal Warranty policies and procedures apply. SERVICE INSTRUCTION A - F-TYPE (X152) ONLY 1. Access the evaporative emission canister (see TOPIx Workshop Manual section 303-13: Evaporative Emission Evaporative Emission Canister [steps 1-7 only]). 2. Release the tension from the evaporative emission canister hose fasteners and move the fasteners towards the center of the pipe. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 3 of 26 3. NOTE: The evaporative emission canister hose fasteners must be reused to install the new evaporative emission canister hose. Remove and discard the evaporative emission canister hose. • Do not discard the hose fasteners. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 4 of 26 4. Install the original evaporative emission canister hose fasteners onto the new evaporative emission canister hose. 5. Install the new evaporative emission canister hose. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 5 of 26 6. Install the evaporative emission canister hose fasteners into their final position. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 6 of 26 7. Reverse the evaporative emission canister access procedure (see TOPIx Workshop Manual section 303-13: Evaporative Emission - Evaporative Emission Canister [steps 7-1]). SERVICE INSTRUCTION B - XE (X760), XF (X260) ONLY 1. Remove the rear left wheel (see TOPIx Workshop Manual section 204-04: Wheels and Tires, Removal and Installation). 2. Remove the rear left wheel arch liner. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 7 of 26 3. Remove the connector and fastener. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 8 of 26 4. Remove the evaporative emission canister assembly. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 9 of 26 5. NOTE: The evaporative emission canister hose fasteners must be reused to install the new evaporative emission canister hose. Remove and discard the evaporative emission canister hose. • Do not discard the hose fasteners. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 10 of 26 6. Install the original evaporative emission canister hose fasteners onto the new evaporative emission canister hose. 7. NOTE: The evaporative emission canister hose fasteners must be reused to install the new evaporative emission canister hose. Install the new evaporative emission canister hose. 1. Install the evaporative emission canister hose fasteners into their final position. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 11 of 26 8. Install the evaporative emission canister assembly. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 12 of 26 9. Install the connector and fastener. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 13 of 26 10. Install the rear left wheel arch liner. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 14 of 26 11. Install the rear left wheel (see TOPIx Workshop Manual section 204-04: Wheels and Tires, Removal and Installation). SERVICE INSTRUCTION C - XF (X250) ONLY 1. Remove the rear right wheel (see TOPIx Workshop Manual section 204-04: Wheels and Tires, Removal and Installation). 2. Remove the rear right wheel arch liner. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 15 of 26 3. Remove the pipe. 4. Remove the connector and fastener. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 16 of 26 5. Remove the evaporative emission canister assembly. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 17 of 26 6. NOTE: The evaporative emission canister hose fasteners must be reused to install the new evaporative emission canister hose. Remove and discard the evaporative emission canister hose. • Do not discard the hose fasteners. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 18 of 26 7. Install the original evaporative emission canister hose fasteners onto the new evaporative emission canister hose. 8. NOTE: The evaporative emission canister hose fasteners must be reused to install the new evaporative emission canister hose. Install the new evaporative emission canister hose. 1. Install the evaporative emission canister hose fasteners into their final position. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 19 of 26 9. Install the evaporative emission canister assembly. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 20 of 26 10. Install the connector and fastener. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 21 of 26 11. Install the pipe. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 22 of 26 12. Install the rear right wheel arch liner. 13. Install the rear right wheel (see TOPIx Workshop Manual section 204-04: Wheels and Tires, Removal and Installation). SERVICE INSTRUCTION D - XJ (X351) ONLY http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 23 of 26 1. Remove the rear right wheel (see TOPIx Workshop Manual section 204-04: Wheels and Tires, Removal and Installation). 2. Remove the rear left wheel arch liner. 3. NOTE: The evaporative emission canister hose fasteners must be reused to install the new evaporative emission canister hose. Remove and discard the evaporative emission canister hose. • Do not discard the hose fasteners. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 24 of 26 4. Install the original evaporative emission canister hose fasteners onto the new evaporative emission canister hose. 5. NOTE: The evaporative emission canister hose fasteners must be reused to install the new evaporative emission canister hose. Install the new evaporative emission canister hose. 1. Install the evaporative emission canister hose fasteners into their final position. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 25 of 26 6. Install the rear left wheel arch liner. http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016 Page 26 of 26 7. Install the rear right wheel (see TOPIx Workshop Manual section 204-04: Wheels and Tires, Removal and Installation). http://topix.jaguar.jlrext.com/topix/service/procedure/705689/ODYSSEY_FSA/G202950... 11/11/2016