ITB13-035b

Classification:
Reference:
Date:
AT13-019b
ITB13-035b
October 21, 2016
CVT FLUID LEVEL CHECK SERVICE INFORMATION
This bulletin has been amended. The APPLIED VEHICLES section has been revised.
No other changes have been made. Please discard all previous versions of this bulletin.
APPLIED VEHICLES:
APPLIED VIN and DATE:
APPLIED TRANSMISSION:
2013 JX35 (L50)
2014-2017 QX60 (L50)
2014-2017 QX60 Hybrid (L50)
2013 JX35:
Vehicles built AFTER 5N1AL0M(* *)DC 343902 and March 26, 2013
2014-2017 QX60 and QX60 Hybrid: All
Vehicles equipped with CVT ONLY
SERVICE INFORMATION
Applied vehicles equipped with a CVT have a “cap” that appears to be a fluid level gauge. This “cap” will NOT
have a gauge or “dipstick”. This is normal. Do NOT replace the “cap” because it is thought to have a “dipstick”.
The fluid level is not checked from this location. The fluid level for applied vehicles is checked from the oil pan
(refer to the appropriate section of the Electronic Service Manual (ESM)). Whenever checking, filling, or topping
off a CVT’s fluid level of an applied vehicle for any reason, use the procedure outlined in the appropriate section
of the ESM.
No gauge
“CAP”
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you
believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to
determine if this applies to your vehicle.
1/1