MI16-32
Service Bulletin Details
Public Details for: MI16-32
Explains that improved bearings are now available to replace the original bearings used on some prevost vehicles idler pulleys.
- 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 -
Models from 2017
2017 PREVOST H3-45 |
2017 PREVOST H3-45 VIP |
2017 PREVOST X3-45 |
2017 PREVOST X3-45 VIP |
2017 PREVOST XL2 |
Models from 2016
2016 PREVOST H3-45 |
2016 PREVOST H3-45 VIP |
2016 PREVOST X3-45 |
2016 PREVOST X3-45 VIP |
2016 PREVOST XL2 |
Models from 2015
2015 PREVOST H3-45 |
2015 PREVOST H3-45 VIP |
2015 PREVOST X3-45 |
2015 PREVOST X3-45 VIP |
2015 PREVOST XL2 |
Models from 2014
2014 PREVOST H3-45 |
2014 PREVOST H3-45 VIP |
2014 PREVOST X3-45 |
2014 PREVOST X3-45 VIP |
2014 PREVOST XL2 |
Models from 2013
2013 PREVOST H3-45 |
2013 PREVOST H3-45 VIP |
2013 PREVOST X3-45 |
2013 PREVOST X3-45 VIP |
2013 PREVOST XL2-45 ENTERTAINER |
Models from 2012
2012 PREVOST H3-45 |
2012 PREVOST H3-45 VIP |
2012 PREVOST X3-45 |
2012 PREVOST X3-45 VIP |
2012 PREVOST XL2 |
2012 PREVOST XLII-45 ENTERTAINER |
Models from 2011
2011 PREVOST H3-45 |
2011 PREVOST H3-45 VIP |
2011 PREVOST X3-45 |
2011 PREVOST X3-45 VIP |
2011 PREVOST XL2 |
2011 PREVOST XLII-45 ENTERTAINER |
Models from 2010
2010 PREVOST H3-45 |
2010 PREVOST H3-45 VIP |
2010 PREVOST X3-45 |
2010 PREVOST X3-45 VIP |
2010 PREVOST XL2 |
2010 PREVOST XLII-45 ENTERTAINER |
Models from 2009
2009 PREVOST H3-45 |
2009 PREVOST H3-45 VIP |
2009 PREVOST X3-45 |
2009 PREVOST X3-45 VIP |
2009 PREVOST XL2 |
2009 PREVOST XLII-45 ENTERTAINER |
Models from 2008
2008 PREVOST H3-45 |
2008 PREVOST H3-45 VIP |
2008 PREVOST X3-45 |
2008 PREVOST X3-45 VIP |
2008 PREVOST XLII-45 ENTERTAINER |
2008 PREVOST XLII-45 MTH |
MAINTENANCE INFORMATION MI16-32 DATE : OCTOBER 2016 SECTION: 01 - Engine SUBJECT : BEARINGS FOR IDLER PULLEYS IMPORTANT NOTICE This modification is recommended by Prevost to increase your vehicle's performance. Note that no reimbursement will be awarded for carrying out this modification. APPLICATION Upon replacement of pulleys used on Prevost vehicles fan and A/C and alternator idlers/tensioners (except commuter vehicles) DESCRIPTION Improved bearings are now available to replace the original bearings used on some Prevost vehicles idler pulleys (see application table below). These bearings, of heavier duty construction, will offer extended durability when compared with the original units. These new bearings will now be installed in older model pulley assemblies sold as replacement parts and will also be offered as a “bearing only” part number (see table 1, current & improved part # columns). New complete idler assemblies equipped with hi-temperature bearings will also be available for customers wanting to replace their current units on vehicles operating in severe conditions and/or hi-temperature environment (see table 1, new & hi-temp part # columns). . The bearings used in these new idlers will offer maximum durability through the use of hi-temperature grease and seals along with an inner steel cage. Also take note that new aramid alternator are available to complement the installation. These belts combined with the new idlers/bearings will provide even greater durability. Consult publication MI15-43A for belt listing and information or click here for direct access. Refer to table and illustrations below to order the correct bearings/pulley assemblies.MI16-32 / Page 2 / 4 PULLEY IDENTIFICATION (typical) HI-TEMP BEARING INSTALLATION (see table 1 below for application) MI16-32 / Page 3 / 4 TABLE 1: IMPROVED AND HI-TEMP BEARING APPLICATION NUMBER ON ILLUSTRATION 1 2 VEHICLES PART DESCRIPTION Complete Idler Assembly, With bracket Large A/C with 2 alternators Complete Idler Assembly, With bracket Large A/C with 3 alt or with small A/C (IF EQUIPPED) E-5459 to H-6098 (X series) D-2364 to G-3412 (H series) D-5298 to H-6098 (X series) D-2153 to G-3412 (H series) CURRENT ASSEMBLY PART # 457545 NOW WITH IMPROVED BEARING 457510 NOW WITH IMPROVED BEARING IMPROVED BEARING PART # HI-TEMP HI-TEMP ASSEMBLY PART # BEARING PART # 507014 (IMPROVED BEARING ONLY) 509952 450094 (20X52X22.2) (25X62X25.4) 507014 (IMPROVED BEARING ONLY) 509952 450095 (20X52X22.2) 3 E-5459 to H-6098 (X series) D-2364 to G-3412 (H series) 457505 NOW WITH IMPROVED BEARING 507014 KIT- SMALL A/C (IMPROVED BEARING ONLY) (20X52X22.2) 450334 KIT- LARGE A/C 4 5 Lower Alt Idler Assembly With Bitzer A/C compressor Idler Pulley Assembly, Fan Drive Under fan belt E-5459 to H-6098 (X series) D-2364 to G-3412 (H series) 8-9259 to H-6098 (X series) 8-0948 to G-3412 (H series) 457705 NOW WITH IMPROVED BEARING 052896 SUPERSEDED PART 507014 (IMPROVED BEARING ONLY) (20X52X22.2) (HI-TEMP BEARING ONLY) (25X62X25.4) 450333 Pulley, Tensioner A/C Assembly Double V grooves (HI-TEMP BEARING ONLY) 509952 (HI-TEMP BEARING ONLY) (25X62X25.4) 509952 (HI-TEMP BEARING ONLY) (25X62X25.4) 509952 010074 KIT (HI-TEMP BEARING ONLY) (25X62X25.4) 509953 N/A 050027 (HI-TEMP BEARING ONLY) (30X72X30.2) NOTE Material can be obtained through regular channels. MI16-32 / Page 4 / 4 TABLE 2: TORQUE SPECIFICATION FOR PULLEYS NUMBER ON ILLUSTRATION 1 2 457545 CURRENT PART # AND TIGHTENING TORQUE 457510 3 4 5 457505 457705 052896 010074 82 lb-ft 050027 35 lb-ft 150 lb-ft 150 lb-ft (bracket to frame 35 lb-ft) (bracket to frame 35 lb-ft) 150 lb-ft with small A/C 35 lb-ft with large A/C 450094 450095 (For Small A/C) 150 lb-ft (bracket to frame 35 lb-ft) (bracket to frame 35 lb-ft) 82 lb-ft 35 lb-ft 450333 HI-TEMP BEARING ASSEMBLY PART # AND TIGHTENING TORQUE 82lb-ft 82 lb-ft 450334 (For Large A/C) 59 lb-ft PARTS / WASTE DISPOSAL Discard according to applicable environmental regulations (Municipal/State[Prov.]/ Federal) Access all our Service Bulletins on https://techpub.prevostcar.com/en/bulletins Or scan the QR-Code with your smart phone. E-mail us at [email protected] and type “ADD” in the subject to receive our warranty bulletins by e-mail.