CK17-30

CK17-30
Conversion Kit
Date
Expiration
Revision
Page
11.2017
N/A
0
1(7)
TGW2 4G CONVERSION - ACCESSORY KIT 23266301
Prevost / Volvo Vehicles
DESCRIPTION
On the vehicles affected by this bulletin, it is now possible to replace the older generation TGW 2.0 (3G
network) by the newer 2.1 version (4G the network) using accessory kit 23266301 and the following
procedure.
MODEL YEAR(S) AND VEHICLES INVOLVED
Model
VIN
H3 Series
Vehicles using TGW 2.0 with 3G network
Model Year : 2015 to 2018
From 2PCH33492FC712922 up to 2PCH3349XJC713941.
X3 Series
Vehicles using TGW 2.0 with 3G network
Model Year : 2015 to 2018
From 2PCCS3499FC735871 up to 2PCCS349XJC736231.
Volvo 9700
Vehicles using TGW 2.0 with 3G network
Model Year : 2015 to 2018
From 3CET2V227F5170550 up to 3CET2V922J5186069.
MATERIAL NEEDED
Order the following parts:
Part No.
Description
Qty
22861158
TGW2.1 (4G) WIFI ECU
1
22990242
4G SIM Card
1
Equipment required:
Description
Laptop with PTT (Premium TechTool, latest version installed) & related cables.
Qty
1
NOTE
Material can be obtained through regular channels.
Writer:
MG

CK17-30
Conversion Kit
PROCEDURE
Date
Expiration
Revision
Page
11.2017
N/A
0
2(7)
DANGER
Park vehicle safely, apply parking brake, stop engine. Prior to working on the vehicle, set the ignition
switch to the ON position
PART 1: ACCESSORY KIT
1.
In Premium TechTool, select PROGRAM tab. In PROGRAM tab, select operation 1700-22-03-06
Accessory Kit then clicks START.
2.
Enter Accessory kit number 23266301 Click on PROGRAM button below and then follow the
instructions. The programming process will start.
Writer:
MG

CK17-30
Conversion Kit
Date
Expiration
Revision
Page
11.2017
N/A
0
3(7)
PART 2: HARDWARE REPLACEMENT
1. In PROGRAM tab, select operation 1700-22-03-12 Replace Hardware then clicks START.
Writer:
MG

CK17-30
Conversion Kit
Date
Expiration
Revision
Page
11.2017
N/A
0
4(7)
NOTE
Old TGW 2.0 ECU
must stay connected,
do not replace before
parameters have
been read.
2. Once the parameters have been read, the following screen will appear. Follow the steps outlined to
replace the old TGW ECU.
Writer:
MG

CK17-30
Conversion Kit
Date
Expiration
Revision
Page
11.2017
N/A
0
5(7)
→ Turn the ignition key to the OFF position.
→ Remove old hardware (TGW 2.0).
→ Install new hardware (TGW 2.1 ECU and new SIM card).
→ Turn the key to the ON position.
→ Click continue to start programming.
Writer:
MG

CK17-30
Conversion Kit
Date
Expiration
Revision
Page
11.2017
N/A
0
6(7)
PART 3: SIM CARD INSTALLATION AND CALIBRATION
1. Proceed to the new SIM card calibration following the instructions below.
→ SIM card is installed in new ECU.
→ No DTCs are set for the Telematics System ECU
→ Turn the ignition key from OFF to ON to reset control unit.
→ Leave ignition key in ON position for 45 seconds or more.
Writer:
MG

CK17-30
Conversion Kit
Date
Expiration
Revision
Page
11.2017
N/A
0
7(7)
PARTS / WASTE DISPOSAL
Discard waste according to applicable environmental regulations (Municipal/State[Prov.]/ Federal)
ESTIMATED TIME
The time required to perform this bulletin is approximately One (1.0) hour.
Access all our Service Bulletins on http://techpub.prevostcar.com/en/
or scan the QR-Code with your smart phone.
E-mail us at [email protected] and type “ADD” in the subject to
receive our warranty bulletins by e-mail.
Prevost engages in a continuous program of testing and evaluating to provide the best possible product. Prevost, however, is not
committed to, or liable for updating existing products.
Writer:
MG