PIP5553

Bulletin No.: PIP5553
Published date: 02/2/2018
Preliminary Information
PIP5553 SES Lamp With Camshaft or Oil Pump System Related DTCs
Product Investigation Review Required
Models
Brand:
Model:
Model Years:
VIN:
from
Engine:
to
Transmissions:
Cadillac
CTS-V
2018
All
All
6.2L, LT1, LT4
All
Cadillac
Escalade
2018
All
All
6.2L, L86
All
Chevrolet
Camaro
2018
All
All
6.2L, LT1, LT4
All
Chevrolet
Corvette
2018
All
All
6.2L, LT1, LT4
All
Chevrolet
Silverado
2018
All
All
4.3L 5.3L 6.2L LV3, L83, L86
All
Chevrolet
Suburban
2018
All
All
5.3L L83 6.2l, L86
All
Chevrolet
Tahoe
2018
All
All
5.3L L83 6.2L L86
All
GMC
Sierra
2018
All
All
4.3L 5.3L 6.2L LV3, L83, L86
All
GMC
Yukon Models
2018
All
All
5.3L, 6.2L, L83, L86
All
Involved Region or Country North America
The vehicle may have an SES lamp with any of the following DTC P06DA, P06DB, P06DC, P06B6, P06B7,
Condition
P250A, P0300, P0340, P0341, P0335, P0336, P0641, P0011, P0010, P2088, P2089, and/or P2230. Possible
crank no start or a stall.
Cause
Possible wiring jumper harness chaffed at the bolt at the X154 connector on lower left side of the
engine front cover.
Correction:
Inspect for the wiring harness being chaffed or pinched under the bracket on the location below.
Below is what has been found
Before installing a new jumper harness be sure to inspect the wiring harness.
As seen above 1. shows a good harness 2. shows a suspect harness.
if the harness looks like number 2 please adjust the harness as needed.
When a permanent repair or part replacement is identified a PI revision or bulletin will be submitted.
Version History
Version
Modified
1
© 2016 General Motors. All Rights Reserved.