T-SB-0133-14 Rev

T-SB-0133-14
Rev2
September 30, 2014
Premium HDD Navigation Map Update Process
(AVN/AW-EMV)
Service
Category
Audio/Visual/Telematics
Section
Navigation/Multi Info Display
Market
USA
Applicability
YEAR(S)
MODEL(S)
2013 – 2014
Avalon, Avalon HV,
Land Cruiser, Venza
2012 – 2014
Camry, Camry HV,
Prius, Prius PHV, Prius
V, RAV4 EV
2015
Land Cruiser, Prius,
Prius PHV
2013
Sequoia
ADDITIONAL INFORMATION
REVISION NOTICE
September 16, 2016 Rev2:
• The Parts information section, and the Required Tools & Equipment section has been updated.
November 5, 2015 Rev1:
• Applicability has been updated to remove the 2015 model year Prius V and add 2015 model
year Land Cruiser vehicles.
• The entire bulletin has been updated.
Any previous printed versions of this bulletin should be discarded.
SUPERSESSION NOTICE
The information contained in this bulletin supersedes SB No. T-SB-0007-13.
• Applicability has been updated to include 2014 model year Avalon HV and 2015 model year
Prius, Prius PHV, and Prius V vehicles.
• The Required Tools & Equipment, and Repair Procedure sections have been updated.
Service Bulletin No. T-SB-0007-13 is Obsolete and any printed versions should be discarded.
Be sure to review the entire content of this bulletin before proceeding.
© 2016 Toyota Motor Sales, USA
Page 1 of 9
T-SB-0133-14
Rev2
Page 2 of 9
September 30, 2014
Premium HDD Navigation Map Update Process (AVN/AW-EMV)
Introduction
Toyota models equipped with the Premium HDD Navigation (AVN/AW-EMV) System require a
Special Service Tool (SST) USB drive to update the map, points of interest, Gracenote®, and system
software. The SST is used with all vehicles to deliver the update, however a unique Activation
Number is required for each vehicle. Activation Numbers are provided in an Activation Card Number
(ACN) pamphlet available through the normal parts ordering system. Use the process described in
this bulletin to perform the update.
NOTE
• Gracenote® information must be updated at the same time as Map Data. This data is included
on the Map Data SST.
• Map data will be released annually through the shipment of a USB Drive SST to each dealer.
The SST must be stored in the SST cabinet to ensure it can be easily found.
Parts Information
PART NUMBER
PART NAME
QTY
86271-HDD07-16
ACN NAV UPDTE V.16.1 (Pamphlet)
1
NOTE
Pamphlet is blue, with Toyota and Denso labels on the front cover.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
–
–
–
–
Required Tools & Equipment
SPECIAL SERVICE TOOLS (SST)
PART NUMBER
QTY
USB Drive Navigation Map Update - Denso*
TOYD-HDD07-16
1
* Essential SST.
NOTE
Additional SSTs may be ordered by calling 1-800-933-8335.
© 2016 Toyota Motor Sales, USA
Rev2
T-SB-0133-14
September 30, 2014
Page 3 of 9
Premium HDD Navigation Map Update Process (AVN/AW-EMV)
On-vehicle Data Navigation Update
1. Update Gracenote® information using Service Bulletin T-SB-0108-15, “Premium HDD Navigation
Gracenote Database Update.”
HINT
Connect a battery charger to the vehicle prior to beginning the process to ensure constant
battery voltage.
2. Log into TIS.
3. Log into Navigation Update Wizard.
Figure 1..
A. Click on the TIS tab.
B. Click on the Diagnostics tab.
C. Click on the Navigation tab.
D. Re-enter your password.
E. Click Login.
4. Select Denso from the Select Navigation
Manufacturer dropdown.
Figure 2..
5. Enter the Activation Card Number from the inside
of the pamphlet (obtained from parts department).
Figure 3..
6. Click Submit.
© 2016 Toyota Motor Sales, USA
T-SB-0133-14
Rev2
September 30, 2014
Page 4 of 9
Premium HDD Navigation Map Update Process (AVN/AW-EMV)
On-vehicle Data Navigation Update (Continued)
7. Cycle the ignition ON (Engine/Hybrid/EV system OFF).
NOTE
• Vehicles WITHOUT Smart Key system: Turn the ignition key to the “ON” position.
• Vehicles WITH Smart Key system: Press the “ENGINE START STOP” switch two times with
the brake pedal released.
8. Press the INFO APPS button on the navigation
head unit.
Figure 4..
9. Select Map Data on the navigation screen.
Figure 5..
© 2016 Toyota Motor Sales, USA
T-SB-0133-14
Rev2
September 30, 2014
Premium HDD Navigation Map Update Process (AVN/AW-EMV)
On-vehicle Data Navigation Update (Continued)
10. Record the Map Version and Map Update ID from
the navigation screen.
Figure 6..
11. Enter navigation data into the Navigation Update
Wizard form.
Figure 7..
A. Select the correct USB part number (found on
the SST packaging, starts with “TOYD”).
B. Input the Map Update ID into TIS
(without hyphens).
C. Input the Map Version into TIS.
D. Enter the VIN.
E. Enter the Repair Order Number.
F. Click Submit.
12. Check off each item after confirming that it is
correct. If any of the information is incorrect, click
the Back button.
Figure 8..
13. Click Confirm.
© 2016 Toyota Motor Sales, USA
Page 5 of 9
T-SB-0133-14
Rev2
September 30, 2014
Page 6 of 9
Premium HDD Navigation Map Update Process (AVN/AW-EMV)
On-vehicle Data Navigation Update (Continued)
14. Note the License Key that was generated.
(Print this page if necessary.)
Figure 9..
15. Insert the USB Drive SST into the USB port of the vehicle (usually located under the navigation
head unit, in the center console/armrest, or glove box).
16. Select Update Map on the navigation screen.
Figure 10..
17. Select Yes.
Figure 11..
© 2016 Toyota Motor Sales, USA
T-SB-0133-14
Rev2
September 30, 2014
Premium HDD Navigation Map Update Process (AVN/AW-EMV)
On-vehicle Data Navigation Update (Continued)
18. Enter the License Key from step 14.
Figure 12..
19. Select OK.
20. Update navigation head unit software. Select Yes
on the Software Update screen to accept and
begin this update.
Figure 13..
If the head unit displays the Map Update screen,
go to step 21.
NOTE
Navigation Map Data will be loaded when this
process completes.
Figure 14..
© 2016 Toyota Motor Sales, USA
Page 7 of 9
T-SB-0133-14
Rev2
September 30, 2014
Page 8 of 9
Premium HDD Navigation Map Update Process (AVN/AW-EMV)
On-vehicle Data Navigation Update (Continued)
A. Cycle ignition OFF, then ON (Ready
OFF/Engine OFF).
Figure 15..
B. Allow update to complete (approximately
10 minutes).
Figure 16..
C. The head unit will prompt to cycle ignition. Cycle ignition OFF and then ON (Ready
OFF/Engine OFF).
D. Press the INFO APPS button.
Figure 17..
E. Select Map Data on the navigation screen.
© 2016 Toyota Motor Sales, USA
Rev2
T-SB-0133-14
September 30, 2014
Premium HDD Navigation Map Update Process (AVN/AW-EMV)
On-vehicle Data Navigation Update (Continued)
21. The Navigation Map Update will begin
automatically.
Figure 18..
NOTE
This process will take about 45 minutes.
22. The new map data will be available after you cycle
the ignition. Cycle ignition OFF, then ON (Ready
OFF/Engine OFF).
Figure 19..
23. Remove the USB Drive SST from the vehicle to complete the Map Update.
Figure 20..
24. Map Update is complete.
25. Verify navigation operation.
© 2016 Toyota Motor Sales, USA
Page 9 of 9