T-TT-0391-16
Service Bulletin Details
Public Details for: T-TT-0391-16
Tt: when replacing the hard disk drive (hdd) or navigation unit (navi unit) follow the instructions below.
Models from 2014
| 2014 TOYOTA AVALON |
| 2014 TOYOTA CAMRY |
| 2014 TOYOTA LAND CRUISER |
| 2014 TOYOTA PRIUS |
| 2014 TOYOTA PRIUS V |
| 2014 TOYOTA RAV4 EV |
| 2014 TOYOTA VENZA |
Models from 2013
| 2013 TOYOTA 4RUNNER |
| 2013 TOYOTA AVALON |
| 2013 TOYOTA CAMRY |
| 2013 TOYOTA LAND CRUISER |
| 2013 TOYOTA PRIUS |
| 2013 TOYOTA PRIUS V |
| 2013 TOYOTA RAV4 EV |
| 2013 TOYOTA SEQUOIA |
| 2013 TOYOTA VENZA |
Models from 2012
| 2012 TOYOTA 4RUNNER |
| 2012 TOYOTA AVALON |
| 2012 TOYOTA CAMRY |
| 2012 TOYOTA PRIUS |
| 2012 TOYOTA PRIUS V |
| 2012 TOYOTA RAV4 EV |
| 2012 TOYOTA VENZA |
Tech Tip T-TT-0391-16 April 26, 2016 Subject Market Hard Disk Drive (HDD) Replacement Procedure For Gen 7 USA Service Category Section Audio/Visual/Telematics Navigation/Multi Info Display Applicability All Applicable Models APPLICABLE VEHICLES 2012-2014 2012-2014 2013-2014 2012-2014 2013-2015 2013 Camry Avalon Avalon HV RAV4 EV Land Cruiser Sequoia 2012-2015 2012-2014 2012-2015 2012-2014 2012-2013 2012-2014 Prius Venza Prius PHV Prius V 4Runner Camry HV CONDITION When replacing the Hard Disk Drive (HDD) or Navigation Unit (Navi Unit) follow the instructions below: RECOMMENDATIONS 1. Remove the Navi Unit from the vehicle and replace the HDD or the Navi Unit. Note: See figures 1 and 2 below for reference. DENSO Exchange part (Navi Unit) is not shipped with HDD DENSO Exchange parts (HDD and Navi Unit) are shipped open for pairing, so these parts should accept the other component. 2. Install the Navi Unit in the vehicle and press the ignition start button once without stepping on the brake pedal (ACC ON). →Screen shows: “System Loading. Don’t turn off the power.” 3. After loading completes, the map will be displayed on the screen. 4. Press the ignition start button twice without stepping on the brake pedal (this will switch the vehicle off) and WAIT FOR SIX MINUTES. Once the HDD is inserted into the Navi Unit, the HDD has been paired with it. Once paired, it cannot be used with any other Navi Unit or other HDD. Expires on Ver. 2.7 01/01/2016 T 07/26/2016 © 2016, Toyota Motor Sales, USA Page 1 of 2 Tech Tip T-TT-0391-16 April 26, 2016 Subject Market Hard Disk Drive (HDD) Replacement Procedure For Gen 7 USA Applicability LINK REFERENCES This Tech Tip does not contain any link references Expires on Ver. 2.7 01/01/2016 T 07/26/2016 © 2016, Toyota Motor Sales, USA Page 2 of 2