B540617

TIS Service Bulletin
Page 1 of 2
SI B54 06 17
Special Roofs
November 2017
Technical Service
WATER LEAK NEAR ROOF FUNCTION CENTER (FZD)
MODEL
F25 (X3)
SITUATION
Dampness is noticed on the roof liner near the Roof Function Center and/or the hands free microphone.
CAUSE
Water is leaking at front of sunroof cassette, at the front end frame at the plastic/aluminum junction point.
CORRECTION
Apply additional butyl rope to reinforce transition point at the front end frame of the sunroof cassette.
PROCEDURE
For conditions that are similar to the situation described:
z
Follow the attached Panorama Roof Drainage Repair Procedure.
PARTS INFORMATION
Part Number
Description
Quantity
81 22 0 441 263
Butyl Rope
As needed
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
Defect Code:
5412215000
Labor Operation:
Labor Allowance:
Description:
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/447... 3/8/2018
TIS Service Bulletin
54 10 260
Page 2 of 2
Refer to KSD2
Removing and installing panorama glass roof
(Main work)
Refer to KSD2
Removing and installing panorama glass roof
(Plus work)
5 FRU
Leak testing and applying butyl rope to affected
leak area.
Or:
54 10 760
And:
54 99 000
If you are using a Main labor code for another repair, use the Plus code labor operation 54 10 760 instead of 51
10 260.
Refer to KSD2/AIR for the corresponding flat rate unit (FRU) allowances.
Work time labor operation code 51 99 000 is not considered a Main labor operation. Also, since the “work time”
FRU allowance to be claimed is specified, a separate punch time is not required.
And, as needed:
Sublet – Bulk Materials
Sublet Code 4
See the sublet
reimbursement
calculations below
Reimbursement for the repair-related bulk
material (Do not use part numbers for claim
submission)
Sublet reimbursement calculation for claiming repair-related bulk material (BMW part number) is at dealer net
price for the “used quantities” plus your center’s handling.
Enter this material cost in sublet and itemize the amount on the repair order and in claim comment section.
Overlapping Labor Procedure – Other Repairs
If invoicing the KSD2 flat rate labor operation codes for other repair work results in overlapping labor, for those
flat rate labor operations that are affected, you can now:
z
Replace the stated KSD2 “FRU allowance” with a “reduced FRU value” to eliminate the overlapping labor.
For help in identifying the overlapping labor, please refer to the AIR FRU Plausibility Check (Overlapping Labor
Tool) that is located in the AIR Client.
Eligible other repair work being claimed under a different defect code will require separate punch times.
On the repair order and in the claim comment section, please identify and itemize those labor operations being
claimed with a “reduced FRU value.”
ATTACHMENTS
View PDF attachment B540617Repair Attachment A.
[ Copyright ©2017 BMW of North America, Inc. ]
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/447... 3/8/2018
SI B54 06 17 Repair Attachment A
November 2017
F25 PANORAMA ROOF DRAINAGE REPAIR PROCEDURE
Introduction or Preparatory Items:
1. Refer to Repair instructions “REP 54 10
260 Removing and installing panorama
glass roof”. With headliner removed,
identify the affected area and water test
to confirm leak location.
Note: In the picture at left, the water is
dyed green for clarity.
2. If the water is leaking in this area
(junction between aluminum and plastic
end frame of the sunroof cassette),
remove all water from cassette and
prepare to perform repair.
Continue with sunroof cassette
removal.
1
SI B54 06 17 Repair Attachment A
November 2017
3. Please sunroof cassette on suitable
work surface. Unclip drive cable for
access to leak area.
4. Using butyl rope (BMW part # 83 19 0
429 524), form into the desired shape
by hand and press firmly (where
indicated by circled area) onto the
bottom side of the panorama unit.
Perform this repair on both sides of the
sunroof cassette.
2
SI B54 06 17 Repair Attachment A
November 2017
5. After the butyl rope is in place, it can be
pressed on firmly with a bone tool or
similar flat object.
6. Reassemble all removed components
and install sunroof cassette into the
vehicle. Follow repair instructions
regarding sunroof initialization.
3