SSM 47002

Service Bulletin Details

Public Details for: SSM 47002

Some 2011-2017 fiesta vehicles may exhibit various concerns following ipc replacement including odometer displaying incorrect english or metric units and/or diagnostic trouble code (dtc) U2101 in multiple modules. If programmable module ins


- 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 -

Models from 2017
2017 FORD FIESTA
Models from 2016
2016 FORD FIESTA
Models from 2015
2015 FORD FIESTA
Models from 2014
2014 FORD FIESTA
Models from 2013
2013 FORD FIESTA
Models from 2012
2012 FORD FIESTA
Models from 2011
2011 FORD FIESTA 
SSM
47002
Some 2011-2017 Fiesta vehicles may exhibit various concerns following IPC replacement including
odometer displaying incorrect English or Metric units and/or diagnostic trouble code (DTC) U2101 in
multiple modules. If Programmable Module Installation (PMI) has been performed on the
replacement IPC, disconnect the IPC, start a new Integrated Diagnostic System (IDS) or Ford J2534
Diagnostic Software (FJDS) session and perform a PMI on the IPC. Do not reconnect the IPC until
after the IDS or FJDS states it is unable to communicate with the IPC, then allow the PMI process to
complete. This will automatically load the correct configuration and address any related DTCs or
symptoms.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.