07-138-18

ATTENTION:
CLAIMS PERSONNEL q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
© 2018 Subaru of America, Inc. All rights reserved.
GENERAL MANAGER q
PARTS MANAGER
q
q
SERVICE INFORMATION BULLETIN
APPLICABILITY:
		
SUBJECT:
2012-2016MY Impreza
2013-2016MY Forester
NUMBER: 07-138-18
DATE: 07/30/18
IG2 and ACC Relay Change
INTRODUCTION:
This Service Information bulletin announces the standardization of the IG2 and ACC relays used on
the models listed. Both of these relays are located on the back (front facing) side of the passenger
compartment fuse box (F/B) as shown in the image below.
F/B Back Side
(1)- IG2 Relay
(2)- ACC Relay
PART INFORMATION:
The new part number for both of these relays is: 82501AL000.
NOTE: Only these 2 relays have been changed to the new part number. Other locations requiring
part number 82501AG070 will continue to use that part number as specified in the parts catalog.
Continued...
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Bulletin Number: 07-138-18; Date 07/30/18
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Page 1 of 2
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedure for relay replacement is unchanged. Always refer to the applicable Service
Manual and review the full requirements of the repair being performed. The Service Manual
procedures contain information critical to performing an effective repair the first time and every
time. This includes but is not limited to: important SAFETY precautions, proper inspection criteria,
necessary special tools, required processes and related one-time-use parts needed for a complete and
lasting repair.
NOTE: Whenever space allows, it is recommended to always use Relay Pliers, Special Tool
SOA814001T when removing relays to avoid possible damage to the fuse box terminals.
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Bulletin Number: 07-138-18; Date 07/30/18
Page 2 of 2