ITB13-035c

Classification:
Reference:
Date:
AT13-019c
ITB13-035c
August 15, 2018
CVT FLUID LEVEL CHECK SERVICE INFORMATION
This bulletin has been amended. The APPLIED VEHICLES and SERVICE INFORMATION sections have been revised.
No other changes have been made. Please discard all previous versions of this bulletin.
APPLIED VEHICLES:
APPLIED VIN and DATE:
2013 JX35 (L50)
2014-2019 QX60 (L50)
2014-2017 QX60 Hybrid (L50)
2019 QX50 (J55)
2013 JX35 built AFTER 5N1AL0M(* *)DC 343902 and March 26, 2013
2014-2019 QX60 All
2014-2017 QX60 Hybrid All
2019 QX50 All
SERVICE INFORMATION
Applied vehicles equipped with a CVT have a “cap” that appears to be a fluid level gauge. This “cap” will NOT
have a gauge or “dipstick”. This is normal. Do NOT replace the “cap” because it is thought to have a “dipstick”.
Whenever checking, filling, or topping off a CVT’s fluid level of an applied vehicle for any reason, use the
procedure outlined in the appropriate section of the ESM.
No gauge
“CAP”
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you
believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to
determine if this applies to your vehicle.
1/1