LTB01208NAS1
Service Bulletin Details
Public Details for: LTB01208NAS1
The hood interior release lever may be inoperative and not release the hood.
- 2017 -
Models from 2017
2017 LAND ROVER DISCOVERY |
8/2/2018 LTB01208NAS1 - Hood Release Inoperative | TOPIx LT B 0 1 2 0 8 N A S 1 TECHNICAL BULLETIN 02 AUG 2018 © Jaguar Land Rover North America, LLC NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Land Rover service facility to determine whether this bulletin applies to a specific vehicle. I N F O R M AT I O N SECTION: 501-14: Handles, Locks, Latches and Entry Systems S U B J E C T/ C O N C E R N : Hood Release Inoperative AFFECTED VEHICLE RANGE: MODEL: Discovery (LR) MODEL YEAR: 2017 https://topix.jaguar.jlrext.com/topix/content/document/view?id=918908 VIN: 000004-046517 ASSEMBLY PLANT: Solihull 1/9 8/2/2018 LTB01208NAS1 - Hood Release Inoperative | TOPIx MARKETS: NORTH AMERICA CONDITION SUMMARY: SITUATION: The hood interior release lever may be inoperative and not release the hood. CAUSE: This may be caused by the hood release cable not being the correct length. ACTION: Should a customer express this concern, follow the Workshop Procedure below. PA RTS : PART NUMBER LR121817 DESCRIPTION Hood release cable QUANTITY 1 TOOLS: Refer to Workshop Manual for any required special tools. WARRANT Y: NOTES: Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to JLR claims submission system to obtain the latest repair time. The JLR Claims Submission System requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero. https://topix.jaguar.jlrext.com/topix/content/document/view?id=918908 2/9 8/2/2018 LTB01208NAS1 - Hood Release Inoperative | TOPIx DESCRIPTION Hood release cable - Renew SRO 76.16.89.01 TIME (HOURS) 0.5 CONDITION CODE 42 CAUSAL PART LR083194 NOTE: Normal Warranty procedures apply. WORKSHOP PROCEDURE: 1 Verify hood release operation. If the hood interior release lever does operate the hood latches and the hood can be opened, go to Step 5. If the hood interior release lever does not operate the hood latches and the hood cannot be opened, go to Step 2. 2 NOTE: Components shown removed from the vehicle for clarity. https://topix.jaguar.jlrext.com/topix/content/document/view?id=918908 3/9 8/2/2018 LTB01208NAS1 - Hood Release Inoperative | TOPIx Remove hood interior release lever from the hood release mechanism. 3 NOTE: Components shown removed from the vehicle for clarity. https://topix.jaguar.jlrext.com/topix/content/document/view?id=918908 4/9 8/2/2018 LTB01208NAS1 - Hood Release Inoperative | TOPIx Release the hood release cable from the hood release mechanism. 4 Use a suitable tool to operate the hood release cable to open the hood latches. 5 Remove the hood left and right latches (see TOPIx Workshop Manual section 501-14: Handles, Locks, Latches and Entry Systems - Removal and Installation - Hood Latch). https://topix.jaguar.jlrext.com/topix/content/document/view?id=918908 5/9 8/2/2018 6 LTB01208NAS1 - Hood Release Inoperative | TOPIx Release the hood release cable. https://topix.jaguar.jlrext.com/topix/content/document/view?id=918908 6/9 8/2/2018 7 LTB01208NAS1 - Hood Release Inoperative | TOPIx Remove the trim. https://topix.jaguar.jlrext.com/topix/content/document/view?id=918908 7/9 8/2/2018 8 LTB01208NAS1 - Hood Release Inoperative | TOPIx Release the hood release cable from the retainer. https://topix.jaguar.jlrext.com/topix/content/document/view?id=918908 8/9 8/2/2018 9 LTB01208NAS1 - Hood Release Inoperative | TOPIx Remove the hood release cable from the vehicle. 10 Reverse Steps 5-9 to install the new hood release cable. https://topix.jaguar.jlrext.com/topix/content/document/view?id=918908 9/9