652413

Page 1 of 2
SI B65 24 13
Audio, Navigation, Monitors, Alarms, SRS
January 2014
Technical Service
SUBJECT
Headunit-High: INITIAL Enabling Code Is Not Accepted Via I-Drive
MODEL
F01
F02
F02H
F06
F07
F10
F10H
F12
F13
F15
F22
F25
F30
F30H
F31
F32
F33
F34
Produced from July 2013 (MY14 vehicles)
With option 609 (Navigation System Professional, HU-H)
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/158... 2/5/2014
Page 2 of 2
and
Without option 6VA (CIC contribution)
SITUATION
The navigation system part of the Headunit-High (HU-H) cannot be activated when entering the
20-digit INITIAL enabling code manually via the iDrive controller.
CAUSE
Application error in the Headunit-High (HU-H).
INFORMATION
Do not replace any parts.
NOTE: First time activation of the navigation system should always be performed during the
Quality Certification 1 (QC1) Pre-Delivery Check, with the vehicle connected to the diagnosis
system ISTA. Refer to SI B65 30 09.
Connect the vehicle to the diagnosis system ISTA and activate the navigation system. The code is
entered when running the QC1 Pre-Delivery Check test module. Refer to SI B09 04 09.
IMPORTANT: No programming is required.
WARRANTY INFORMATION
Not applicable since the first time activation of the navigation system is part of the QC1 process
and cannot be claimed separately.
[ Copyright ©2014 BMW of North America, Inc. ]
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/158... 2/5/2014