SSM74060

9/5/2018
SSM74060 - Remote Function Actuator module will not respond to diagnostic equipment requests | TOPIx
Reference
SSM74060
Models
F-PACE / X761
F-TYPE / X152
XE / X760
XF / X260
XJ / X351
Title
Remote Function Actuator module will not respond to diagnostic
equipment requests
Category
Electrical
Last modified
05-Sep-2018 00:00:00
Symptom
203000 Basic Electrical
Content
Issue: Following what appears to be a successful software update to
the Remote Function Actuator (RFA) or replacement module using
Pathfinder or Symptom Driven Diagnostics (SDD) the module
appears to be unresponsive to any further diagnostic commands or
smart key remote operation.
Cause: Diagnostics Layer (DSL) lock up causes a continuous loop
between the Transport Layer (TPL) and DSL.
Action: If the concern appears during a RFA module replacement/
software update, carry out a battery hard reset by disconnecting the
battery earth lead for approximately 30 seconds and re-connect the
earth lead. If the smart key remote operation is not restored continue
with diagnostics using Pathfinder/ SDD and with reference to TOPIx.
Technicians - Please rate this SSM and provide comments so that
future communications can be improved.
1 = Poor – Basic information provided – The SSM does not help me
resolve the customer concern.
3 = Average – Adequate information provided – The SSM partially
helps me resolve the customer concern.
5 = Excellent – All required information provided to resolve the
customer concern.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=923917
1/1