S-SB-0012-14-Rev

S-SB-0012-14
Rev1
April 29, 2014
HVAC Evaporator Drain Hose Clogged Due to Insect
Intrusion
Service
Category
Vehicle Interior
Section
Heating/Air Conditioning
USA
Market
Applicability
YEAR(S)
MODEL(S)
2016
iM
2011 – 2016
tC
2008 – 2015
xB
2008 – 2014
xD
ADDITIONAL INFORMATION
REVISION NOTICE
August 23, 2017 Rev1:
• Applicability has been updated to include 2015 model year xB vehicles, 2015 – 2016 model year
tC vehicles, and 2016 model year iM vehicles.
• The Parts Information section has been updated.
Any previous printed versions of this bulletin should be discarded.
Introduction
Some vehicles in particular geographic areas may exhibit a condition where the HVAC Evaporator
Drain Hose has become obstructed with an insect nest. An insect repellent drain hose tip
(ARINIX® Tip) is now available to help minimize future occurrences of this environmental condition.
For some models, a new drain hose is required to properly fit the ARINIX® Tip. Follow the procedures
in this bulletin for proper handling and installation of this optional service part.
NOTE
The ARINIX® Tip is NOT registered or labeled for sale or use outside the United States or
Puerto Rico.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
–
–
–
–
© 2017 Toyota Motor Sales, USA
Page 1 of 5
S-SB-0012-14
Rev1
April 29, 2014
Page 2 of 5
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
Parts Information
PART NUMBER
MODEL
MODEL YEAR
2008 – 2016
2011 – 2013
87265-33010
88539-12200
tC
Late
2013 – 2016
xB
xD
iM
2008 – 2013
QTY
Connector,
Water Hose
(ARINIX® Tip)
All
1
88539-12230
Hose, Drain Cooler
90480-26030
Grommet
88539-21030
88539-12200
REPAIR
PROCEDURE
NEW
PREVIOUS
All
PART NAME
A
B
Hose, Drain Cooler
88539-12230
90480-26030
2015
88539-12230
2008 – 2010
88539-52020
2011 – 2014
88539-52040
2016
88539-12230
A
Grommet
1
1
1
1
1
1
Hose, Drain Cooler
B
1
1
1
Required Tools & Equipment
REQUIRED MATERIAL
QUANTITY
Chemical Resistant Gloves (Made From Waterproof Material)
1
Safety Requirements for Handling the ARINIX® Tip (Water Hose Connector)
• Follow the manufacturer’s instructions for cleaning/maintaining Personal Protection Equipment
(PPE). If no such instructions for cleaning/maintaining PPE exist, use detergent and hot water.
Keep PPE separate from other laundry.
• Users should remove PPE immediately after handling this product.
• Wash the outside of the gloves before removing.
• Users should wash hands before eating, drinking, chewing gum, or using the toilet.
© 2017 Toyota Motor Sales, USA
S-SB-0012-14
Rev1
April 29, 2014
Page 3 of 5
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
Safety Requirements for Handling the ARINIX® Tip (Water Hose Connector) (Continued)
CAUTION
IF SWALLOWED:
Call a poison control center or doctor immediately for treatment advice. Have the person sip
a glass of water if able to swallow.
• Do NOT induce vomiting unless instructed by a poison control center or doctor.
• Do NOT give anything by mouth to an unconscious person.
IF ON SKIN OR CLOTHING:
Take off the contaminated clothing immediately. Rinse skin immediately with plenty of water for
15 to 20 minutes. Call a poison control center or doctor for treatment advice.
IF IN EYES:
Hold eye(s) open and rinse gently and slowly with water for 15 to 20 minutes. Remove contact
lenses (if present) AFTER the first 5 minutes, then continue rinsing eye(s). Call a poison control
center or doctor for treatment advice.
HOTLINE NUMBER:
Have the product container or label with you when calling a poison control center or doctor
or when going for treatment. You may also contact 1-800-424-9300 for emergency medical
treatment information.
© 2017 Toyota Motor Sales, USA
Rev1
S-SB-0012-14
April 29, 2014
Page 4 of 5
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
Directions for Use on ALL Repair Procedures
The ARINIX® Tip contains permethrin, a pesticide, as the active ingredient. Note, it is a violation of
Federal law to use this product in a manner inconsistent with its labeling.
Repair Procedure A
1. Follow the instructions provided in the Safety Requirements for Handling the ARINIX® Tip
(Water Hose Connector) section of this bulletin.
2. Locate the HVAC evaporator drain hose.
3. Refer to the Technical Information System (TIS), applicable model and model year Repair
Manual to remove the HVAC evaporator drain hose.
4. Put on necessary PPE and install the ARINIX® Tip (Water Hose Connector) into the NEW HVAC
evaporator drain hose listed in the Parts Information section of this bulletin.
5. When installing the ARINIX® Tip, verify that it is
fully seated in the HVAC evaporator drain hose
as shown.
Figure 1..
6. Refer to TIS, applicable model and model year Repair Manual to install the HVAC evaporator
drain hose.
© 2017 Toyota Motor Sales, USA
S-SB-0012-14
Rev1
April 29, 2014
Page 5 of 5
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
Repair Procedure B
1. Follow the instructions provided in the Safety Requirements for Handling the ARINIX® Tip
(Water Hose Connector) section of this bulletin.
2. Locate the HVAC evaporator drain hose.
3. Refer to TIS, applicable model and model year Repair Manual to remove the HVAC evaporator
drain hose.
4. Put on ALL necessary PPE and install the ARINIX® Tip into the ORIGINAL HVAC evaporator
drain hose listed in the Parts Information section of this bulletin.
5. When installing the ARINIX® Tip, verify that it is fully seated in the HVAC evaporator drain
hose as shown in Figure 1.
6. Refer to TIS, applicable model and model year Repair Manual to install the HVAC evaporator
drain hose.
© 2017 Toyota Motor Sales, USA