SSM 47823

Service Bulletin Details

Public Details for: SSM 47823

Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (mil) with diagnostic trouble code (dtc) P264F after powertrain control module (pcm) replacement. This dtc indicates that the engine serial number (esn) must b


- 9999 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 -

Models from 9999
9999 FORD E SERIES
SSM 47823
Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with
diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement.
This DTC indicates that the engine serial number (ESN) must be programmed into the PCM.
The ESN is located on PTS> OASIS> Features> Engine Serial Number. Once the ESN is
obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the
PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab>
powertrain menu> Service Functions> ESN.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.