A011906 2041261-
Service Bulletin Details
Public Details for: A011906 2041261-
- 2015 -
Models from 2015
| 2015 AUDI S3 |
Technical Service Bulletin 01 EPC light on, DTCs P039B00, P03A500, P03AF00, and P03B900 stored in the ECM 01 19 06 2041261/3 February 13, 2019. Supersedes Technical Service Bulletin Group 01 number 18-95 dated December 14, 2018 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment S3 2015 All Not Applicable Condition REVISION HISTORY Revision Date Purpose 3 - Revised Warranty (Updated Claim Type) 2 12/14/2018 Revised title Revised Service (Updated SVM table) Revised Warranty (Added Claim Types) 1 07/27/2015 Initial publication Customer states: EPC light is illuminated. Workshop findings: One or more of the following DTCs is stored in the engine control module (ECM), J623 (address word 0001): DTC P039B00 (Cylinder 1 pressure too high). DTC P03A500 (Cylinder 2 pressure too high). DTC P03AF00 (Cylinder 3 pressure too high). DTC P03B900 (Cylinder 4 pressure too high). In addition to the DTCs listed above, one or more of the following DTCs may also be stored: DTC P030000 (Random/multiple cylinder misfire detected). DTC P030100 (Cylinder 1 misfire detected). DTC P030200 (Cylinder 2 misfire detected). DTC P030300 (Cylinder 3 misfire detected). DTC P030400 (Cylinder 4 misfire detected). DTC P130A00 (Hide cylinder). Page 1 of 3 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Technical Background Due to a software error, the ECM can falsely record engine misfires in the primary detection window. No actual engine misfires are present until the EPC light is illuminated and the ECM hides a cylinder. Production Solution Improved ECM software. Service SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the ECM, J623 (address word 0001) using the SVM action code as listed in the table below, if necessary. If the new software is already installed in the vehicle but the condition still exists, create a TAC ticket. Model Engine Old Software Part Number Old Software Version New Software Part Number New Software Version (or higher) SVM Code Input S3 CYFB 8V0906259H 0001 8V0906259H 0002 01A190 S3 CYFB 8V0906259E All 8V0906259H 0002 01A190 S3 CYFB 8V0906259B All 8V0906259H 0002 01A190 Warranty Claim Type: 110 up to 6 Months/6,000 Miles. 1E1 up to 8 Years/80,000 Miles. G10 for CPO Covered Vehicles – Verify Owner. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 2470 Damage Code: 0039 Page 2 of 3 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Labor Operations: SVM software update 2470 2599 Time stated on diagnostic protocol (Max 60 TU) Diagnostic Time: GFF No allowance 0 TU Road test prior to service procedure No allowance 0 TU Road test after service procedure No allowance 0 TU Claim Comment: As per TSB #2041261/3 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Additional Information The following Technical Service Bulletin will be necessary to complete this procedure: TSB 2011732 00 Software Version Management (SVM), operating instructions. All part and service references provided in this TSB (2041261) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Page 3 of 3 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.