TSBELE170

GROUP
ELE
MODEL
2016-2017MY
Optima (JFa)
NUMBER
170
DATE
May 2019
TECHNICAL SERVICE BULLETIN
ANTENNA CAP REPLACEMENT
SUBJECT:
This bulletin provides the procedure to replace the antenna cover that is loose and/or has
separated from the antenna base on some 2016-2017MY Optima (JFa) vehicles, produced
from August 25, 2015 through May 2, 2017. Follow the procedure outlined in this bulletin to
repair the customer concern of missing or loose antenna cover.
 NOTICE
The antenna assembly does not need to be replaced for a missing cover; additionally
dealers will need to provide a VIN when submitting the parts order due to limited
launch supplies. Antenna covers are color specific and should not be ordered for
stocking purposes.
 NOTICE
VINs that start with 5XX are designated Optima (JFa) and produced in the United
States. This TSB applies to Optima (JFa) that is produced in United States only.
File Under: 
Circulate To:
X General Manager

X Service Advisors

X Technicians

X Service Manager

X Parts Manager

X Body Shop Manager 
X Fleet Repair

Page 2 of 4
SUBJECT:
ANTENNA CAP REPLACEMENT
Service Procedure:
1.
Carefully separate the antenna cap (A)
from the base when broken or loose.
Note: If the antenna cover is missing,
confirm proper antenna operation. If
antenna is operating properly, proceed to
step 2.
2.
A
Remove any remaining plastic remnants
from the screws at the antenna base (B)
and then using regulated shop air, gently
blow and clean the rubber padding of the
base.
B
3.
Using the adhesive kit provided to your
dealer, apply a small amount of adhesive
over the five screws (C) at the antenna
base, enough to cover the screw holes.
C
TSB: ELE170 Optima (JFa) May 2019
Page 3 of 4
ANTENNA CAP REPLACEMENT
SUBJECT:
4.
Apply a continuous line of adhesive (C)
onto the antenna cap channel as outlined
in photo, to ensure proper sealing.
 NOTICE
C
Do not use too much silicone
epoxy or the material may
squeeze out during the cover
installation.
5.
Carefully align and place the antenna
cap over the antenna base. Firmly hold
the cap onto the base for fifteen (15)
seconds.
6.
Wipe off any excess adhesive and ensure the antenna and surrounding areas are clean.
7.
Remove adhesive tip and discard. Replace the original adhesive cap back onto adhesive
tube for future use. Store the tube in a sealed zip-lock bag or container.
8.
Verify proper operation of the radio.
TSB: ELE170 Optima (JFa) May 2019
Page 4 of 4
ANTENNA CAP REPLACEMENT
SUBJECT:
AFFECTED VEHICLE RANGE:
Model
Production Date
Optima (JFa)
August 25, 2015 to May 2, 2017
REQUIRED TOOL:
Tool Name
Tool Number
Figure
Comments
Auto-shipped to Dealers.
Loctite Adhesive &
Nozzle Kit
Kit includes 1 Adhesive
Tube and 4 Nozzles.
UM019 CH150
Additional orders can be
made through Kia Chemicals.
Adhesive Gun
Auto-shipped to Dealers.
UM019 CH151
REQUIRED PARTS:
Description
Antenna
Cover
Part Number
Color
96219D5000ABTQK
Platinum Graphite
96219D5000EBQK
Ebony Black
96219D5000IMQK
Titanium
96219D5000KCSQK
Sparkling Silver
96219D5000M2RQK
Sangria
96219D5000M5GQK
Moss Gray
96219D5000M5UQK
Horizon Blue
96219D5000SWPQK
Snow White Pearl
96219D5000TR3QK
Remington Red
Figure
WARRANTY INFORMATION:
N Code: M65 C Code: ZZ2
Claim
Type
Causal P/N
Qty.
Repair
Description
Labor Op
Code
Op
Time
Replacement
P/N
Qty.
W
96210 D5550
0
Antenna Cover
Replacement
96210F05
0.3
M/H
See Required
Parts Table
1
Note: Use sublet code ‘X1’ with a maximum allowed amount of $12.25 for the “Adhesive Kit”.
One tube of the “Adhesive Kit” will cover 4 vehicles.
TSB: ELE170 Optima (JFa) May 2019