2051045.3

Technical Service Bulletin
Topic
Market area
Brand
Transaction No.
Level
Status
Release date
Night vision camera - Washer jet leaking
Bentley: worldwide (2WBE),Hongkong-Macau (5HK)
Bentley
2051045/3
EH
Released for publishing
May 20, 2019
New customer code
Object of complaint
Complaint type
Position
assistance systems, comfort controls -> night vision function -> camera cleaner (night vision system) functionality -> no function
Vehicle data
Bentayga and New Continental GT
Sales types
Type
3S3*
3S3*
3S3*
4V1*
4V1*
4V1*
4V1*
MY
2018
2019
2020
2017
2018
2019
2020
Brand Designation Engine code Gearbox code
E
*
*
E
*
*
E
*
*
E
*
*
E
*
*
E
*
*
E
*
*
Documents
Document name
master.xml
Final drive code
*
*
*
*
*
*
*
Technical Service Bulletin
Night vision camera - Washer jet leaking
Transaction No.: 2051045/3
Release date: May 20, 2019
Condition
Customer may experience dripping / leaking of the night vision camera washer jet.
Technical Background
The manufacturing date code of the affected parts is required in order to complete the replacement
Refer to Section 1 of the Measure section for Bentayga instruction
Refer to Section 2 of the Measure section for New Continental GT instruction
Production Solution
-
Service
Section 1 - Bentayga
Note… In order to complete the replacement process under warranty, visual confirmation of the manufacturing date codes of the
washer hose assembly are required. Please provide clear high resolution photographs of the manufacturing dates
The date codes are located on a label usually located on the left or right hand side of the hose and also embossed onto the Night
vision camera washer jet carrier as detailed within the onward instructions
•
Remove the front bumper moulding. Refer to “Front bumper moulding - To remove and fit” – Repair Group 63 in Elsa pro.
•
Replace the headlamp / night vision camera washer hose assembly (fixed to the bumper moulding) with a new assembly. Refer to “Headlamp
washer hoses - To remove and fit” – Repair Group 92 in Elsa pro.
•
Provide a clear high resolution photograph of the manufacturing date (circled) on the label as shown in Figure 1
Figure 1
•
Provide a clear high resolution photograph of the embossed manufacturing date (inset) on the wash jet carrier as shown in Figure 2.
•
Photographs to be sent on an Information Only DISS
Figure 2
The date stamp (inset) is situated on the underside of the jet carrier elbow as shown and is very small.
The arrow refers to the month of manufacture and the two numbers either side of the arrow represents the year of manufacture.
IMPORTANT: Carry out all necessary alignment procedures as per Elsa pro instruction
Refer to “Calibrating front camera for driver assist systems” – Repair Group 44 in Elsa pro.
Refer to “Calibrating night vision system” – Repair Group 44 in Elsa pro.
Refer to “Adjusting adaptive cruise control” – Repair Group 44 in Elsa pro.
Section 2 – New Continental GT
Note… In order to complete the replacement process under warranty, visual confirmation of the manufacturing date code of the
night vision camera washer jet carrier is required as well as a clear photograph of the night vision camera jet hose assembly as
detailed within the onward instructions
•
Remove the front bumper moulding. Refer to “Front bumper moulding - To remove and fit” – Repair Group 63 in Elsa pro.
•
Referring to Figure 3 Replace the headlamp / night vision camera washer hose assembly (fixed to the bumper moulding) with a new assembly.
Refer to “Headlamp washer hoses - To remove and fit” – Repair Group 92 in Elsa pro.
Figure 3
•
Provide a clear high resolution photograph of both sides of the washer jet hose label - Refer to Figures 4 and 5
Figure 4
Figure 5
•
Provide a clear high resolution photograph of the embossed manufacturing date (inset) on the wash jet carrier as shown in Figure 6
Figure 6
The date stamp (inset) is situated on the underside of the jet carrier elbow as shown and is very small.
The arrow refers to the month of manufacture and the two numbers either side of the arrow represents the year of manufacture.
IMPORTANT: Carry out all necessary alignment procedures as per Elsa pro instruction
Refer to “Calibrating front camera for driver assist systems” – Repair Group 44 in Elsa pro.
Refer to “Calibrating night vision system” – Repair Group 44 in Elsa pro.
Refer to “Adjusting adaptive cruise control” – Repair Group 44 in Elsa pro
Warranty
Refer to Elsa pro - Labour operations for all applicable labour codes and times
Required Parts and Tools
Refer to the ETKA parts catalogue