TSB 19-2207

Page 1 of 2
TECHNICAL SERVICE BULLETIN
Hybrid/Energi - Illuminated MIL With DTCs P1450, P0456, P0457,
P04EE And/Or P04EF
192207
27 June
2019
This bulletin supersedes 14-0193. Reason for update: Replace Awareness/Interim Message
Model:
Ford
2013-2017 C-MAX Hybrid
2013-2017 Fusion
Lincoln
2013-2017 MKZ
Summary
This article supersedes TSB 14-0193 to update the vehicle model years affected.
Issue: Some 2013-2017 C-Max/Fusion/MKZ Hybrid/Energi vehicles may exhibit an illuminated
malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P1450, P0456, P0457, P04EE
and/or P04EF. This may be due to the sealing capability of the canister purge valve. To correct the
condition, follow the Service Procedure steps to update the PCM software and replace the canister purge
valve.
Action: Follow the Service Procedure steps to correct the condition on vehicles that meet all of the
following criteria:
• One of the following vehicles:
- 2013-2017 C-Max
- 2013-2017 Fusion Hybrid/Energi
- 2013-2017 MKZ Hybrid/Energi
• Illuminated MIL with DTCs P1450, P0456, P0457, P04EE and/or P04EF
Parts
Part Number
Description
AU5Z-9C915-D Evaporative Emission Canister Purge Valve
Quantity
1
Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions
Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB.
Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS
part coverage tool.
Labor Times
Description
2013-2017 Fusion Hybrid/Energi And MKZ Hybrid: Retrieve DTCs, Reprogram The
Appropriate Modules As Required By The Software Update Includes Time To
Replace The Canister Purge Valve And Clear Codes (Do Not Use With Any Other
Labor Operations)
Operation
No.
Time
192207A
0.8
Hrs.
192207B
0.9
Hrs.
http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2207/US/E...
7/1/2019
Page 2 of 2
2013-2017 C-MAX Hybrid: Retrieve DTCs, Reprogram The Appropriate Modules As
Required By The Software Update Includes Time To Replace The Canister Purge
Valve And Clear Codes (Do Not Use With Any Other Labor Operations)
2013-2017 C-MAX Energi: Retrieve DTCs, Reprogram The Appropriate Modules As
Required By The Software Update Includes Time To Replace The Canister Purge
Valve And Clear Codes (Do Not Use With Any Other Labor Operations)
192207C
1.1
Hrs.
Repair/Claim Coding
Causal Part:
RECALEM
Condition Code: 01
Service Procedure
1. Reprogram the PCM using the latest software level of the appropriate Ford diagnostic scan tool.
2. Replace the evaporative emission canister purge valve. Refer to Workshop Manual (WSM), Section
303-13.
© 2019 Ford Motor Company
All rights reserved.
NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge,
tools, and equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not be performed by "do-it-yourselfers". Do
not assume that a condition described affects your car or truck. Contact a Ford or Lincoln dealership to determine whether the
Bulletin applies to your vehicle. Warranty Policy and Extended Service Plan documentation determine Warranty and/or Extended
Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service Bulletin (TSB) was
current at the time of printing. Ford Motor Company reserves the right to supersede this information with updates. The most recent
information is available through Ford Motor Company's on-line technical resources.
http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2207/US/E...
7/1/2019