122-D6B2X-09

Installation and Conversion Instructions
Cayenne (92A)
35/14
ENU
9627
9
Sport Plus Mode
Revision:
This bulletin replaces bulletin Group 9, #35/14, dated December 10, 2014.
> Under “Restriction:” NOT approved for Diesel models! was added.
> Work procedures were revised.
Model Year:
As of 2015 up to 2016
Concern:
Retrofitting
Restrictions:
•
•
•
NOT approved for Diesel derivative models!
ONLY for vehicles with PCM3.1
ONLY for vehicles WITHOUT compass/Sport Chrono clock (I-no. QR0) or WITH analog clock (I-no.
QR3)
Figure 1
Notes:
Activating the "Sport Plus mode" option using the Sport Plus button in the center console allows sporty
tuning of Porsche Stability Management (PSM), Porsche Active Suspension Management (PASM),
Porsche Dynamic Chassis Control (PDCC), transmission and electronic engine management, depending
on the vehicle equipment.
When Sport Plus mode is activated, the Porsche control systems are intentionally shifted towards greater
agility and driving dynamics. (For more information, see Owner’s Manual).
The Sport and Sport Plus modes are displayed in the instrument cluster.
Data relating to laps/distances driven can be recorded and evaluated when the stopwatch (digital display
in the instrument cluster) and Porsche Communication Management (PCM) are combined. To do this, you
must enter the PCM Sport Chrono MMI enabling code.
Tequipment
Aug 2, 2019
Page 1 of 8
9
Cayenne (92A)
9627
Important:
ENU
35/14
Installation and Conversion Instructions
ONLY for vehicles with analog clock (I-no. QR3):
When coding is complete, B will be displayed instead of A in the main menu Vehicle > Settings >
Date/time on the multi-function display in the instrument cluster.
Multi-function display
The clock lighting works when the Chrono time option is confirmed (tick appears).
Information
Please inform your customers about the change in the multi-function display.
Parts Info:
958.044.900.35
Information on
ordering:
A strip for switches (keypad) must also be ordered.
The following illustrations and table make ordering easier.
Aug 2, 2019
Page 2 of 8
 Sport Plus mode
Tequipment
Installation and Conversion Instructions
Cayenne (92A)
35/14
ENU
9627
9
Figure 2
Tequipment
Aug 2, 2019
Page 3 of 8
9
Cayenne (92A)
9627
ENU
Installation and Conversion Instructions
35/14
Figure 3
Aug 2, 2019
Page 4 of 8
Installed
strip for switches
Required
strip for switches
Part No.
Part No.
1
958.613.158.00
2
958.613.160.00
3
958.613.159.00
4
958.613.161.00
5
958.613.162.00
6
958.613.164.00
7
958.613.163.00
8
958.613.166.00
9
958.613.167.00
10
958.613.169.00
11
958.613.168.00
12
958.613.170.00
13
958.613.171.00
14
958.613.173.00
Tequipment
Installation and Conversion Instructions
Cayenne (92A)
35/14
ENU
15
958.613.172.00
16
958.613.174.00
17
958.613.175.00
18
958.613.177.00
19
958.613.176.00
20
958.613.178.00
9627
9
Enabling code:
Sport Chrono, PCM Sport Chrono MMI if necessary
These components require a VIN-specific enabling code and will not function without it. To get the
enabling code, order the applicable kit via your normal parts channels (POLARIS). You must then submit
a Parts Technical Assistance Request (PTAR) in the PTEC system with the correct VIN, Part Number
and PCNA order number to PCNA Parts Support. The PTAR will be returned to you in 1+ working days,
advising you that the code is now displayed in the PIWIS System. Consult Parts Bulletin GR13D90 for
additional ordering details.
Tools:
9900 - PIWIS Tester 3
Work Procedure: 1
2
Preparatory work
1.1
Connect a battery charger.  Workshop Manual '2X00IN Battery trickle charging'
1.2
Remove levelling system (selector switch).  Workshop Manual '431019 Removing and
installing levelling system (selector switch)'
Convert levelling system (selector switch)
2.1
Release locking lug – at the front ( Figure 5
-a-) and lift the trim up slightly ( Figure 5 ).
1
2
3
– Cover
– Locking lug
– Clips
Insert a small screwdriver into the housing (
Figure 5 -b-) and carefully release the clips
( Figure 5 ).
Pull the trim up and off.
Figure 5
Tequipment
Aug 2, 2019
Page 5 of 8
9
Cayenne (92A)
9627
ENU
Installation and Conversion Instructions
35/14
2.2
Release combined switch ( Figure 6 -a-)
and pull it out of the keypad ( Figure 6 ).
1
2
– Combined switch
– Keypad
2.3
Insert combined switch into the new keypad
and press it down until the combined switch
locks with an audible click.
2.4
Position trim on the levelling system (selector
switch) and press it down until the trim locks
with an audible click.
2.5
Figure 6
Install levelling system (selector switch) ( 
Workshop Manual '431019 Removing and installing levelling system (selector switch)').
NOTICE
Voltage drop
•
Risk of irreparable damage to control unit
•
Risk of damage to control unit
•
Fault entries in the control unit
•
Coding in the control unit is aborted
•
Malfunctions in control unit, even during programming

Prior to disconnecting the control unit, switch off the ignition and remove the ignition key.

Ensure that the power supply is not interrupted during programming.

Connect battery charger/power supply suitable for AGM Type batteries, recommended current rating
of 90A fixed voltage 13.5V to 14.5V.
Information
The 9900 - PIWIS Tester III instructions take precedence since the description may be different
with later Tester releases.
The procedure described here has been structured in general terms; different text or additions may
appear on the 9900 - PIWIS Tester III.
Information
The following requirements must be met for coding Sport Plus mode:
Aug 2, 2019
Page 6 of 8
•
Software version 14.500 or higher
•
Sport Chrono enabling code available
Tequipment
Installation and Conversion Instructions
3
Cayenne (92A)
35/14
ENU
9627
9
Coding Sport Plus mode
3.1
9900 - PIWIS Tester 3 must be connected before switching on the ignition.
3.2
Select the required vehicle type. PIWIS Tester Diagnostics starts.
3.3
Maintenance of vehicle data
3.3.1
Select Additional menu by pressing •F7“. Press •F11“ to confirm the question
“Create vehicle analysis log (VAL)?”.
3.3.2
Select the “Maintenance of vehicle data” function. Press •F12“ until "PR numbers"
appears in the Value group column.
3.3.3
Select "Compass" in the Family column. Touch the empty cell behind "Compass" – a
dropdown menu appears.
Information
If QR4 or QR5 is selected, a window opens prompting you to enter the Sport
Chrono enabling code.
ONLY for Japan:
Select "QR4 - Sport Chrono Package". Enter the enabling code and press •OK“ to
confirm. Press •F12“ to continue.
ONLY for vehicles with PCM3.1 (other countries):
Select "QR5 - Sport Chrono Package Plus. Enter the enabling code and press
•OK“ to confirm. Press •F12“ to continue.
3.3.4
A table containing the values to be changed appears.
Save the values by pressing •F8“.
Wait until "Generation of vehicle data is complete........" appears.
3.3.5
Press •F12“ to switch to Report management. Open the log by pressing •F10“
and check that vehicle equipment "Sport Chrono Package Plus - QR5" or "Sport
Chrono Package - QR4" is displayed.
Close the log.
3.4
Adapt coding.
3.4.1
Switch to the "Overview" menu.
Press •F11“ to return to the list of control units.
Select all control units by pressing •Ctrl A“. Press •F12“ to continue.
3.4.2
Switch to the "Codings/adaptations" menu. Press •F12“ to continue.
Select "Automatic coding" mode. Press •F12“ to continue.
3.4.3
Wait until "Coding has been completed successfully." appears. Press •F12“ to
continue. Switch to the "Overview" menu.
Tequipment
Aug 2, 2019
Page 7 of 8
9
Cayenne (92A)
9627
ENU
Installation and Conversion Instructions
35/14
3.5
ONLY for vehicles with PCM3.1:
Enable PCM Sport Chrono MMI.
3.5.1
Select "PCM" control unit. Press •F12“ to continue.
3.5.2
Switch to the "Maintenance/repairs" menu.
3.5.3
Select the "Function enable" menu item. Press •F12“ to continue.
3.5.4
Select the "Sport Chrono" function.
Enter the enabling code and confirm by touching the "Status" cell.
Press •F8“ to execute. Wait until "Enable was successful" appears. Press •F12“
to continue.
96 27 31 40:
3.6
Read out the fault memory of all systems, work through any existing faults, and erase the
fault memory (  Workshop Manual '033500 Fault memory for on-board diagnosis').
3.7
Disconnect battery charger. (  Workshop Manual '2X00IN Battery trickle charging').
3.8
Carry out a function test.
Labor time: 129 TU
Activating Sport Plus mode.
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2019 Porsche Cars North America, Inc.
Aug 2, 2019
Page 8 of 8
Tequipment