PIP5676
Service Bulletin Details
Public Details for: PIP5676
This preliminary information communicates to the technician information on what may be setting dtc P06DE. This is in addition to what is already in the service manual.
- 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 -
Models from 2019
Models from 2018
Models from 2017
Models from 2016
Models from 2015
| 2015 BUICK LACROSSE |
| 2015 BUICK REGAL |
| 2015 CADILLAC ATS |
| 2015 CADILLAC CTS |
| 2015 CHEVROLET COLORADO |
| 2015 CHEVROLET IMPALA |
| 2015 CHEVROLET MALIBU |
| 2015 GMC CANYON |
Models from 2014
| 2014 BUICK REGAL |
| 2014 CADILLAC ATS |
| 2014 CADILLAC CTS |
| 2014 CHEVROLET IMPALA |
| 2014 CHEVROLET MALIBU |
Bulletin No.: PIP5676 Published date: N/A Preliminary Information PIP5676 MIL Due To P06DE and may also have P0521 Models Brand: Model: VIN: Model Years: from Engine: to Transmissions: Buick Envision 2015 - 2019 All All LCV LTG All Buick LaCrosse 2015 - 2019 All All LHN All Buick Regal 2014 - 2019 All All LTG All Cadillac ATS 2013 - 2019 All All LCV LTG All Cadillac CT6 2016 - 2019 All All LTG All Cadillac CTS 2014 - 2019 All All LTG All Chevrolet Blazer 2019 All All LCV All Chevrolet Camaro 2016 - 2019 All All LTG All Chevrolet Colorado 2015 - 2019 All All LCV All Chevrolet Equinox 2019 All All LTG All Chevrolet Impala 2013 - 2019 All All LCV LKW All Chevrolet Malibu 2013 - 2019 All All LCV LKW LTG All Chevrolet Traverse 2017 - 2019 All All LTG All GMC Acadia 2016 - 2019 All All LCV All GMC Canyon 2015 - 2019 All All LCV All GMC Terrain 2017 - 2019 All All LTG All Involved Region or Country North America Condition A customer may come into the dealer for the check engine light being illuminated. The technician may nd P06DE stored in the ECM as a history code. The technician may also nd P0521 set in history with the P06DE. Cause The cause of this concern may be foreign material stuck between the cold start checkball and its seat. Correction: The technician needs to follow SI diagnostics for P06DE. When following SI diagnostics for P06DE, if diagnostics lead to inspecting the oil pump or the engine oil pressure is in specification but very low or below specification, inspect the cold start checkball and seat for having foreign material stuck between them. The checkball should be seated fully against the seat in the pump. Look very close because the foreign material can be very small. If foreign material is found between the cold start checkball and seat, remove the foreign material and reinstall the engine oil pump and road test the vehicle. If no foreign material is found between the cold start checkball and seat, replace the balancer assembly which includes the oil pump assembly. If P06DE continues to reset and following P06DE SI diagnostics again does not lead to a resolution, replace the engine assembly. Engine oil pump cold checkball and seat location Foreign debris The foreign debris can be very small Balancer assembly which includes the engine oil pump assembly Warranty Information For vehicles repaired under the Powertrain coverage, use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information. Labor Operation 4066070 Description Oil Pump Replacement Version History Version Modi ed 1 09/16/2019 - Created on. © 2019 General Motors. All Rights Reserved. Labor Time Use Published Labor Time