JTB00514NAS5

9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
JTB00514NAS5
TECHNICAL BULLETIN
09 SEP 2019
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional
Technicians with the knowledge, tools, and equipment required to do the job properly and
safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not
be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition
described affects your vehicle. Contact an authorized Jaguar service facility to determine
whether this bulletin applies to a specific vehicle.
INFORMATION
This reissue replaces all previous versions. Please destroy all previous versions.
This bulletin supersedes TSB JTB00514NAS4/2018 dated 23 MAY 2018, which should either
be destroyed or clearly marked to show it is no longer valid (e.g. with a line across the page).
Only refer to the electronic version of this Technical Bulletin in TOPIx.
Changes are highlighted in blue
SECTION:
415-00
SUBJECT/CONCERN:
Disc Does Not Eject From The Digital Disc Player
AFFECTED VEHICLE RANGE:
MODEL:
MODEL
YEAR:
VIN:
ASSEMBLY
PLANT:
APPLICABILITY:
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
1/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
MODEL
YEAR:
MODEL:
VIN:
ASSEMBLY
PLANT:
APPLICABILITY:
XE
(X760)
2017
942528979442
Solihull
Vehicles With: InControl Touch
Pro
XE
(X760)
2017
P10168-P11737
Castle Bromwich
Vehicles With: InControl Touch
Pro
XF
(X260)
2016-2017
Y00461Y49979
Castle Bromwich
Vehicles With: InControl Touch
Pro
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
NOTE:
Only continue with this technical bulletin if the customer concern is still present after
the Infotainment Master Controller (IMC) software has been updated to the latest
level.
SITUATION:
The digital disc player will not eject, occasionally skips tracks, cycles quickly through tracks
and 'locks up.' On-screen commands may also fail to operate, an ignition cycle usually
temporarily resolves the problem.
CAUSE:
Incorrect specification Universal Serial Bus (USB) cables, from both the USB HUB and IMC,
were used causing issues with the digital disc player functionality.
ACTION:
Follow the instructions below.
PARTS:
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
2/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
NOTES:
*An allowance an allowance ($2.50 USD [or local equivalency]) has been provided
to cover the cost of the cable ties. Claim using Sundry Code ‘ZZZ001'.
**An allowance ($3.75 USD [or local equivalency]) has been provided to cover the
cost of the felt anti-rattle wiring harness tape. Claim using Sundry Code ‘ZZZ999'.
PART NUMBER
DESCRIPTION
QUANTITY
T2H32167
Front USB link lead - 505 mm
1
T4A16370
Rear link lead - IMC to digital disc player - XE
1
T2H31014
Rear link lead - IMC to digital disc player - XF
1
ZZZ001
*Cable ties - 150mm
1
ZZZ999
**Felt anti-rattle tape
1
WARRANTY:
NOTES:
Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Use TOPIx to obtain
the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor
only claims must show the causal part number with a quantity of zero.
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
USB Front link lead - Renew (with disc drive
already removed)
86.51.39
0.1
42
C2D35999
IMC - USB cable - Renew
86.94.97
1.5
42
C2D35999
DESCRIPTION
NOTE:
Normal Warranty procedures apply.
SERVICE INSTRUCTION:
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
3/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
NOTES:
Only continue with this technical bulletin if the customer concern is still present
after the IMC software has been updated to the latest level.
This procedure contains some variation in the illustrations depending on the
vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to
provide extra clarity.
1.
Remove the front row left seat (see TOPIx Workshop Manual section: 501-10 Seating - Removal and Installation - Front Seat).
2.
Disconnect the start up battery ground cable (see TOPIx Workshop Manual section:
414-01 Battery, Mounting and Cables, General Procedures).
NOTE:
Integrated Control Panel (ICP) may also be referred to as the audio and climate
control assembly.
3.
Remove the ICP (see TOPIx Workshop Manual section: 415-01 Information and
Entertainment System - Removal and Installation - Audio and Climate Control
Assembly).
Vehicles with auxiliary climate control
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
4/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
4.

Remove the trim surround panel from the rear of the center console.
5.

Remove the fixings from the rear seat climate control module and release from the
mounting clips.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
5/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
6.

Disconnect the wiring harness from the rear seat climate control module.
Vehicles without auxiliary climate control
7.

Remove the assembly as shown.
All vehicles
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
6/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
8.
NOTE:
Right side is shown, left side is similar.

Remove the left side floor console side trim.
9.

Disconnect the seatbelt.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
7/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
10.
CAUTION:
Do not use tools during this operation, removal of the components must be
performed by hand.
NOTE:
The type of retaining clip may vary between model variant.

Release the 4 rear seat cushion retaining clips.
11.

Remove the rear seat cushion.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
8/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
12.
NOTE:
Long wheelbase treadplate shown, Standard wheelbase treadplate similar.

Remove the rear left treadplate.
13.

Reposition the rear left door aperture seal to allow the seat bolster to be removed.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
9/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
14.

Remove the rear left seat bolster.
All Vehicles
15.

Fold the rear seat backrest forward.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
10/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
16.

Release the highlighted section of the luggage compartment lid aperture seal.
17.
NOTE:
Where equipped.

Remove the tool kit.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
11/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
18.

Remove the lower scuff plate from the luggage compartment lid aperture.
19.
NOTE:
If equipped.

Remove the Diesel Exhaust Fluid (DEF) filler surround.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
12/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
20.

Remove the loadspace compartment left side trim panel to allow access to the IMC.
21.

Remove the digital disc player and withdraw the unit to view the wiring harness
connections.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
13/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
22.
NOTE:
The electrical connectors in this illustration are shown in the original colors
to provide clarity.

Visually inspect the wiring harness 'A'.
If the wiring harness is routed as shown, do not replace the harness.
Disconnect connector 'B' and continue to step 33.
If the wiring harness is not routed as shown, continue to step 23.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
14/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
23.
CAUTION:
Note the relative positions of the USB 2.0 hub connections before removal.
NOTE:
The electrical connectors and wiring in this illustration are shown in the
original colors to provide clarity.

Disconnect the electrical connectors from the digital disc player, USB 2.0 hub and
WiFi/Bluetooth™ antennas.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
15/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
24.
CAUTION:
Make sure no damage is caused to the wiring harness when removing the
spot tape.

Cut the tape in the position shown. Remove and discard the spot tape and original
front USB link lead 'A'.
25.
NOTE:
Discard the 2 locking tabs.

Use a suitable tool to remove the locking tab from the electrical connector at each
end of the original USB link lead.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
16/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
26.
NOTE:
Only release the electrical connectors from the main black coaxial cable.

Release the electrical connectors from both ends of the original USB link lead.
Discard the original black coaxial USB link lead.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
17/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
27.
NOTE:
Retain the 2 locking tabs for later use.

Use a suitable tool to remove the locking tab from the electrical connector at each
end of the new USB link lead.
28.

Release the electrical connectors from both ends of the new USB link lead.
Discard the electrical connectors.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
18/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
29.

Install the replacement black coaxial USB link lead into the original electrical
connectors.
30.

Install the locking tabs into the electrical connector at each end of the new USB link
lead.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
19/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
31.

Apply felt anti-rattle tape around the length of the replacement USB link lead.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
20/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
32.
NOTES:
The electrical connectors and wiring in this illustration are shown in their
original colors to provide clarity.
Make sure the USB link lead is taped to the original harness in the correct
orientation.

Install the new front link lead 'A' and using suitable tape, secure it to the original
wiring harness.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
21/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
33.
CAUTION:
Make sure no damage is caused to the wiring harness when removing the
spot tape.

Use a suitable tool to remove some of the yellow tape on the IMC rear link lead for
access.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
22/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
34.
CAUTION:
Make sure only the black main USB cable is cut.

Use a suitable tool to cut the IMC rear link lead cable 'A'. Use the sequence in the
illustration to remove the remaining cable from the electrical connector 'B' and
discard.
35.

Using the sequence in the illustration, remove the new rear IMC link lead cable from
the new electrical connector.
Discard the new electrical connector.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
23/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
36.

Install the new IMC rear link lead cable into the original electrical connector (1) and
route the new cable with the main instrument panel harness (2).
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
24/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
37.
CAUTION:
Make sure the electrical connectors are installed as shown. Failure to do so
may damage the component.
NOTE:
The electrical connectors in this illustration are shown in the original colors
to provide clarity.

Install the electrical connectors to the digital disc player and USB 2.0 hub as shown.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
25/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
38.
CAUTION:
Make sure the electrical connectors are installed as shown. Failure to do so
may damage the component.

Install the electrical connectors to the USB 2.0 hub and WiFi/Bluetooth™ antennas as
shown.
39.

Route the new IMC rear link lead cable along the main harness to the floor console,
secure the cable to the main harness using suitable cable ties.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
26/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
40.

Route the new IMC rear link lead cable along the main harness below the floor
console, secure the cable to the main wiring harness using suitable cable ties.
41.

Remove the passenger side carpet retaining washer.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
27/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
42.

Carefully move the passenger floor carpet to one side for access. Route the new
IMC rear link lead cable behind the carpet and secure to the floor vent tubing using
suitable tape, as shown in the illustration.
43.

Route the new IMC rear link lead cable along the main wiring harness below the
passenger door treadplate. Secure the cable to the main wiring harness using
suitable cable ties.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
28/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
44.

Route the new IMC rear link lead cable along the main wiring harness behind the
rear seat bolster, secure the lead to the main harness using suitable cable ties.
45.
CAUTION:
Make sure the new IMC rear link lead cable cannot rub on any sharp edges.

Route the new IMC rear link lead cable through the opening between the rear air
vent tubing and body panel as shown in the illustration.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
29/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
46.
CAUTION:
Make sure to only cut the original IMC rear link lead.

Cut the original IMC rear link lead cable in a suitable position 'A'. Unplug the cable
connector and remaining cable 'B' from the IMC and discard.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
30/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
47.

Route the new IMC rear link lead cable through the harness bracket and using
suitable cable ties, secure it to the main wiring harness. Any excess cable must be
looped '1' and secured to the main wiring harness. Connect the new IMC rear link
lead cable to the IMC '2'.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
31/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
48.
CAUTION:
Make sure the wires are routed correctly when installing the digital disc
player.

Install the digital disc player.
49.
Install the ICP (see TOPIx Workshop Manual section: 415-01 Information and
Entertainment System - Removal and Installation - Audio and Climate Control
Assembly).
50.
Connect the battery ground cable (see TOPIx Workshop Manual section: 414-01
Battery, Mounting and Cables, General Procedures).
51.
52.
Install the tool kit.
WARNING:
The components may be heavy. Take extra care when handling.
Install the spare wheel.
53.
Install the loadspace compartment left side trim panel.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
32/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
54.
NOTE:
If equipped.
Install the DEF filler surround.
55.

Install the lower scuff plate.
Torque: 2.5 Nm
56.
Install the luggage compartment lid aperture seal.
57.
Install the loadspace floor.
58.
Return the rear seat backrest to the upright position.
59.
Install the rear left side rear seat bolster.
60.
Install the rear left side rear door aperture seal.
61.
Install the rear left side rear door treadplate.
62.
Connect the electrical connectors and install the rear seat cushion.
63.
Install the rear seat cushion.
64.
Install the left side floor console side trim.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
33/34
9/9/2019
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2F…
65.
Install the rear heater control panel.
66.
Install the rear heater control panel surround trim.
67.
Install the front left seat (see TOPIx Workshop Manual section: 501-10 - Seating Removal and Installation - Front Seat).
68.
Close the doors and luggage compartment lid.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do?url=https%3A%2F%2Fwww.odyssey.jlrint.com%2Fodyssey%2FDownload…
34/34