SSM74567

Service Bulletin Details

Public Details for: SSM74567

Epb (emergency park brake) is applied and will not release. The epb applied light is not on. The abs (anti-lock braking system), dsc (dynamic stability control) and brake warning lights are on. The "autonomous emergency braking not availa


- 2020 - 2019 - 2018 - 2017 - 2016 -

Models from 2016
2016 JAGUAR XF
Special Service Message
NOTE: A Special Service Message is a formal communication issued by Jaguar and carries the
same importance of a Technical Service Bulletin. An SSM is a quick method of communicating
"Need To Know" information to the technical service community. SSM's may be issued in advance
of a technical bulletin or may be the only communication on a given topic. All information
contained in Jaguar technical communications are intended for use by trained, professional
technicians with the knowledge, tools, and equipment required to complete the procedure
correctly and safely. It informs the Technicians of conditions that may occur on some vehicles, or
provides information that could assist in correct vehicle and diagnostic service.
SSM 74567 - EPB (Emergency Park Brake) is
applied and will not release
Models : F-Pace / X761
I-Pace / X590
XE / X760
XF / X260
Engineer :Shilvock Matthew
Date Last 08 OCT 2019 12:33:04
Updated :
Content :
Issue:
EPB (Emergency Park Brake) is applied and will not release. The EPB applied light is
not on. The ABS (Anti-lock braking system), DSC (Dynamic stability Control) and
brake warning lights are on. The "Autonomous Emergency Braking not available"
message is displayed.
Cause:
Software error. This fault will occur in the following situation.
Vehicle put in to Neutral and IGN (Ignition) turned OFF
IGN OFF for a period of 15 minutes or longer (Cumulative within a given
drive cycle)
This means that if the driver is making a series of short "Neutral IGN
off stops" without the vehicle going to sleep in between then when
the stop time adds up to 15 mins the fault will occur.
Action:
To clear the fault the vehicle needs to go through a sleep cycle as follows.
1) IGN ON
2) Put transmission into PARK
3) IGN OFF
4) Exit vehicle and lock it
5) Wait 15 minutes before re-entering the vehicle.
Version : 1
Attachments : EPB.png
Jaguar Land Rover Limited 2000 - 2019 (Rel. 2673)


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.