NTB19-102
Service Bulletin Details
Public Details for: NTB19-102
2017-2019 titan/titan xd king cab; wind noise at 40 mph and above if you confirm a wind noise coming from the front door area that has the following characteristics: i?? - occurs at 40 mph and above. I?? - the wind noise is heard from
Models from 2019
2019 NISSAN TITAN |
Models from 2018
2018 NISSAN TITAN |
Models from 2017
2017 NISSAN TITAN |
Classification: Reference: BT19-015 Date: NTB19-102 November 14, 2019 2017-2019 TITAN/TITAN XD KING CAB; WIND NOISE AT 40 MPH AND ABOVE APPLIED VEHICLES: APPLIED BODY APPLIED VIN: APPLIED DATE: 2017-2019 Titan (A61) 2017-2019 Titan XD (A61) King Cab 2017-2018 Titan/Titan XD: All 2019 Titan/Titan XD: Built before 1N6(*)A1C(**)KN530308 2017-2018 Titan/Titan XD: All 2019 Titan/Titan XD: Built before September 4, 2019 IF YOU CONFIRM A wind noise coming from the front door area that has the following characteristics: Occurs at 40 mph and above. The wind noise is heard from the left and/or right side of the vehicle. The wind noise may be heard near the rear edge of the front door window or near the front edge of the rear door window. ACTION Replace the sash moldings on both sides of the vehicle with the parts listed in PARTS INFORMATION on the last page of this bulletin. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/3 SERVICE PROCEDURE 1. Verify the wind noise is originating from the area circled in Figure 1. Left side is shown, right side is a mirror image. HINT: The wind noise may be present on one side or both sides of the vehicle. Figure 1 2. Partially remove the rear door weatherstrip (Figure 2). Front Left side is shown, right side is a mirror image. 3. Release the three (3) sash molding clips, indicated with a yellow triangle in Figure 2 and remove the sash molding. 4. Replace the sash molding with the new one listed in PARTS INFORMATION on the next page. 5. Reattach the rear door weatherstrip. 6. Repeat steps 2 through step 5 for the right side of the vehicle. Rear door weatherstrip Sash molding Figure 2 2/3 NTB19-102 PARTS INFORMATION DESCRIPTION PART NUMBER QUANTITY Sash Molding LH 82287-EZ10D 1 Sash Molding RH 82286-EZ10D 1 CLAIMS INFORMATION Submit a Primary Part (PP) type line claim using the following claims coding: DESCRIPTION PFP OP CODE SYM DIA FRT Replace Door Sash Molding (1) UK18AA ZE 32 (2) (1) Reference the electronic parts catalog and use the appropriate Sash Molding as the Primary Failed Part (PFP). (2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat Rate Time (FRT). AMENDMENT HISTORY PUBLISHED DATE REFERENCE November 14, 2019 NTB19-102 DESCRIPTION Original bulletin published 3/3 NTB19-102