02-007-19-3645

Service Bulletin Details

Public Details for: 02-007-19-3645

Some vehicles may exhibit corrosion of the wheel nuts. This is caused by torsional stress concentrating on the tip of the wheel nut because of the thin and long shape of the nut, which damages the coating and causes the corrosion. To correc


- 2020 - 2019 - 2018 - 2017 -

Models from 2020
2020 MAZDA MAZDA3
Models from 2017
2017 MAZDA MAZDA3
Technical
Service Bulletin
Mazda North American Operations
Irvine, CA 92618-2922
Subject:
CORROSION OF WHEEL NUT
Bulletin No.: 02-007/19
Last Issued: 12/20/2019
APPLICABLE MODELS / VINS
2019 Mazda2 (Mexico Built) vehicles with VINs in between 3MD DJ**** ** 307899 - 317142 (produced from
Sep. 1, 2018 to Jul. 22, 2019)
2017 - 2018 Mazda3 (Japan Built) vehicles with VINs in between JM1 BN **** ** 191040 - 199538
(produced from May 7, 2018 to Oct. 27, 2018)
2018 Mazda3 (Mexico Built) vehicles with VINs in between 3MZ BN **** ** 255004 - 277187 (produced from
Sep. 1, 2018 to Dec. 19, 2018)
2019 - 2020 MAZDA3 (Japan Built) vehicles with VINs lower than JM1 BP **** ** 150579 (produced before
Aug. 1 , 2019)
2019 - 2020 MAZDA3 (Mexico Built) vehicles
2018 Mazda6 vehicles with VINs in between JM1 GL**** ** 316373 - 333577 (produced from May 7, 2018
to Dec. 1, 2018)
2019 CX-3 vehicles with VINs in between JM1 DK**** ** 406295 - 441849 (produced from May 7, 2018 to
Apr. 1, 2019)
2018 - 2019 CX-5 vehicles with VINs in between JM3 KF**** ** 404441 - 542054 (produced from May 7,
2018 to Dec. 1, 2018)
2018 - 2019 CX-9 vehicles with VINs in between JM3 TC**** ** 231724 - 314070 (produced from May 7,
2018 to Dec. 1, 2018)
2018 - 2019 MX-5 vehicles with VINs in between JM1 ND**** ** 206203 – 308245 (produced from May 7,
2018 to Apr. 1, 2019)
2018 - 2019 MX-5 30th anniversay edition vehcles wtih VINs from JM1 ND**** ** 400001.
DESCRIPTION
Some vehicles may exhibit corrosion of the wheel nuts. This is caused by torsional stress concentrating on
the tip of the wheel nut because of the thin and long shape of the nut, which damages the coating and
causes the corrosion. To correct this issue, the width across the flats of the wheel nuts have been changed
from 17mm to 21mm.
Page 1 of 4
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
12/20/2019 1:32 PM cciz
Bulletin No.: 02-007/19
Last Issued: 12/20/2019
NOTE: This concern only occurs to vehicles with a wheel nut of 17mm width across the flats.
Customers having this concern should have their vehicle repaired using the following repair procedure.
NOTE:


On May 1, 2018, Japan produced vehicles starting using 17 mm hex lug nuts instead of 21 mm on
the same size thread.
On December 3, 2018, there was a switch from 17 mm lug nuts back to 21 mm lug nuts for
Mazda6, CX-5 and CX-9 vehicles with the VINS listed below.
Vehicle Starting VIN of switch from 17 mm to 21 mm lug nuts on Dec 3, 2018
Mazda6 M1GL1UM8J1333518
CX-5
JM3KFBEY2K0543197
JM3KFACM5K1542002
JM3KFBDM2K0543540
CX-9
JM3TCACY1K0314028

On April 1, 2019, there was a switch from 17 mm lug nuts back to 21 mm lug nuts for CX-3 and MX5 vehicles with the VINS listed below.
Vehicle Starting VIN of switch from 17 mm to 21 mm lug nuts on Dec 3, 2018
CX-3
JM1DKDB76K0441664
MX-5
JM1NDAC7XK0308207
Page 2 of 4
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
12/20/2019 1:32 PM cciz
Bulletin No.: 02-007/19
Last Issued: 12/20/2019
REPAIR PROCEDURE
1. Verify customer concern.
2. Replace the wheel nuts with new 21 mm nuts and replace the wheel nut wrench with a modified one
according to the instructions on MGSS (WHEEL AND TIRE REMOVAL/INSTALLATION).
NOTE:


For Mazda3 5 door HB with Bose audio, replace the 17 mm spare tire bolt with a 21 mm spare tire
bolt.
If the vehicle is equipped with 17 mm wheel lock set, replace it with a 21 mm wheel lock set and
save the 17 mm wheel lock set as it may be collected in the future for inspection.
3. Verify repair.
PARTS INFORMATION
Parts Number
Description
Qty.
Notes
B002-37-160B
Nut, Hub
16 or
20
Aluminum wheel
0603-26-161A
Nut, Hub
16 or
20
Steel wheel
LD47-69-671
Wrench, Nut, Hub
1
All except Mazda3 (BP) and MX-5 (ND) 30th
anniversary edition
LDY7-69-671
Wrench, Nut, Hub
1
Mazda3 (BP) and MX-5 (ND) 30th anniversary edition
DGH9-66-A91
Spare Tire Bolt
1
21 mm spare tire bolt (for Mazda3 5 door HB with
Bose audio)
000088120DBP
Accessory wheel lock
set
1
Used if vehicle is equipped with a 17 mm wheel lock
set
NOTE: Select the corresponding parts according to the GEPC.
Page 3 of 4
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
12/20/2019 1:32 PM cciz
Bulletin No.: 02-007/19
Last Issued: 12/20/2019
WARRANTY INFORMATION
NOTE:



This warranty information applies only to verified customer complaints on vehicles eligible for
warranty repair.
This repair will be covered under Mazda’s New Vehicle Limited Warranty term.
Additional diagnostic time cannot be claimed for this repair.
Warranty Type
A
Symptom Code
53
Damage Code
9A
Part Number Main Cause
Quantity
Operation Number / Labor
Hours:
B002-37-160B or 0603-26-161A
16 or 20
XXR97XRX / 0.4 Hrs.
NOTE:


Claim wheel nut wrench (Qty=1) as a related part.
Claim the accessory wheel lock kit 000088120DBP (21 mm hex) as a related part (if the vehicle is
equipped with a 17 mm wheel lock set) and save the 17 mm wheel lock set as it may be collected in
the future for inspection.
Page 4 of 4
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
12/20/2019 1:32 PM cciz


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.