18-058-19 REV. B
Service Bulletin Details
Public Details for: 18-058-19 REV. B
No start after powertrain control module (pcm) replacement and/or reprogramming
- 2016 - 2015 - 2014 - 2013 - 2012 - 2011 -
Models from 2016
2016 DODGE JOURNEY |
2016 JEEP COMPASS |
Models from 2015
2015 DODGE JOURNEY |
2015 JEEP COMPASS |
Models from 2012
2012 CHRYSLER 200 |
2012 DODGE AVENGER |
2012 DODGE CALIBER |
2012 DODGE JOURNEY |
2012 JEEP COMPASS |
Models from 2011
2011 CHRYSLER 200 |
2011 DODGE AVENGER |
2011 DODGE CALIBER |
2011 DODGE JOURNEY |
2011 JEEP COMPASS |
NUMBER: GROUP: DATE: 18-058-19 REV. B 18 - Vehicle Performance December 19, 2019 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC. This bulletin supersedes Service Bulletin 18-058-19 REV. A, dated November 22, 2019, which should be removed from your files. All revisions are highlighted with **asterisks** and include additional model years. SUBJECT: No Start After Powertrain Control Module (PCM) Replacement and/or Reprogramming MODELS: 2011 2011 2011 2011 - **2016** **2016** 2012 2014 (MK) (JC) (PM) (JS) Jeep Compass/Patriot Dodge Journey Dodge Caliber Chrysler 200 Dodge Avenger NOTE: This bulletin applies to vehicles within the following markets/countries: North America, EMEA, APAC and LATAM. NOTE: This bulletin applies to vehicles equipped with one of the following engines: • 2.0L 4 CYL DOHC 16V Dual V.V.T (Sales Code ECN). • 2.4L 4 CYL DOHC 16V Dual V.V.T (Sales Code ED3). DISCUSSION: CAUTION! Updating the PCM software or replacing the PCM on a vehicle with an incorrect replacement engine will result in a no-start condition which can not be undone. If the engine has been replaced (numbers do not match) do not perform a PCM flash or replace the PCM, unless it is a certified MOPAR engine built specifically for this vehicle application. PCM update/replacement can not be completed on a vehicle with an incorrect replacement engine until the vehicle is returned to the original equipment configuration. Confirm that the last eight digits of the Vehicle Identification Number (VIN) matches the engine identification number before proceeding with PCM software updates or PCM replacement. The engine identification number (last eight digits of the VIN) is stamped on the bottom rear of the engine near the transmission (Fig. 1) . 18-058-19 REV. B -2- Fig. 1 Engine Identification Number Location 1 - Last Eight of VIN POLICY: Information Only