VOS-20-05

Service Information
Offboard Diagnostic Information System Service (ODIS Service)
Number: VOS-20-05
Subject:
Date: Jan. 22, 2019
Software Version Update, Enhancements and Fixes
Supersedes VOS-19-34 due to new diagnostic content version.
The following ODIS Service software versions are available for download.
Current ODIS Service Software Versions
Application: V5.1.6
Diagnostic Content: V2.39.14
Key Fixes/Enhancements for Diagnostic Content: V2.39.14:
1. CA/CM Atlas 2018 – 2020
U104900: Optical data bus open circuit
MOS_X_X_J794_1_0113_11_MOST_Unterbrechung_00011 does not list the J525 - sound system
module as a component of the MOST bus.

Test incorrectly replaces the Instrument Cluster J285 but the error was actually from the J525.
2. A3 - Passat/New Midsize Sedan 2011 – 2015, CKRA 2.0 L TDI-CR / 103 kW
P20E800: Reductant pressure too low SYS_XX_J623_XXXX_1_0510_11_SCR_Systemtest_00011 SCR
systems leak-tightness test detects a malfunction with average reducing agent pressure at 4.61bar but
the specified is at 4.4 ... 5.2bar.
3. 7P - Touareg 2010 – 2017, CGRA 3.6 L FSI / 206kW
P025A00: Fuel Pump Module Control Circuit/Open J538_7P_CGEA_1_0310_11_00011 test for
supply pressure of fuel pump (FP) does not complete. Test not successful! Exited due to reasons of
safety.
Page 1 of 3
© 2020 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information

Test instruction is ignition ON but fails for reason Engine not ON. Engine running / ignition
ON / ignition OFF status during testing is not clear.
4. BU - Jetta 2018 – 2020, DDSA 2.0l Simos/130 kW
Readiness test SYS_J623_1_0816_11_X_X_MSG_OT_SOD_ReadinessCodeErzeugen_00000
continuously fails with error message: Basic setting: Automatic test procedure - Status: could not be
exited. Test is optimized.
5. 7P - Touareg 2010 – 2017, CATA 3.0 L TDI-CR 165kW
DTC P03A7: Cylinder 2 Pressure variation high active/static is not linked to a function test and no
test created in current test plans.
6. CA/CM Atlas 2018 – 2020
B7 - Interface for Access/Start fault B147101: sensor 1 for rear lid opening electrical error
J938_X_1_0914_11_VIP_pruefen_00000 replaces components and does not check wiring.
7. A3 - Passat/New Midsize Sedan 2011 - 2017, CPRA 1.8l Simos / 125 kW
Inlet camshaft adjustment test J623_X_1_0918_11_X_ENW_Verstellung_pruefen_00011
malfunction.

Inlet camshaft phasing bank 1 test result data could not be read. Test instruction: send a
feedback.
8. A3 - Passat/New Midsize Sedan 2011 – 2017, CVCA 2.0l TDI SCR / 110 kW
DTC P026A00: Charge air cooler efficiency below threshold is not linked to a function test and no
test plan created in current test plans.
Page 2 of 3
© 2020 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
9. BW - Tiguan 2018 – 2019
B125C13: Video line open circuit SIG_X_J928_1_0914_11_Videoverbindung_00000 test for the J28- peripheral camera control module, does not specify which camera -front/rear/left/right- video
cable and plug-in connections to check for the fault code.
10. 7P - Touareg 2010 – 2017, CGRA 3.6 L FSI / 206kW
C110702 - Video line for image processing signal malfunction
SYS_7P_J851_1_1111_11_Videoleitung_Signalfehler_00011 test ends with the fault still stored in the
event memory of the control module for image processing -J851.
11. A3 - Passat/New Midsize Sedan 2011 – 2017
B10001B: Driver airbag igniter Resistance too high test N95_X_1_0312_11_00011 ends abruptly
without performing any system diagnosis.
12. General translation errors
Page 3 of 3
© 2020 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.