NTB19-101a

Classification:
Reference:
EL19-042a
Date:
NTB19-101a
April 8, 2020
PUSH BUTTON IGNITION AND DOOR REQUEST SWITCHES
INOPERATIVE
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Please discard previous versions of this bulletin.
APPLIED VEHICLES:
2019-2020 Pathfinder (R52)
2019 Titan/Titan XD (A61) - Platinum, SL, SV, Pro 4X ONLY
APPLIED VIN AND DATE: 2019 Pathfinder: All
2020 Pathfinder: Built before 5N1(*)R2(***)LC 589857
2019 Titan/Titan XD: All
IF YOU CONFIRM
All of the conditions listed below are occurring on an Applied Vehicle with the Intelligent
Key within range.

The doors will not lock/unlock when the request switch on an exterior door handle is
pressed. (Feature not installed on Titan/Titan XD SV models.)

The doors will lock/unlock when the respective buttons are pressed on the
Intelligent Key.

The engine will not start when the ignition switch is pressed while depressing the
brake.

The engine will start when pressing the Remote Engine Start (RES) button on the
Intelligent Key. (Feature not installed on Titan/Titan XD SV and Pro4X models.)

The engine will start when pressing the ignition switch while holding the Intelligent
Key in front of it.
ACTION
Replace the BCM.

Refer to the Electronic Service Manual (ESM) for the procedure to replace the BCM:
ELECTRICAL & POWER CONTROL > BODY CONTROL SYSTEM > BCM >
REMOVAL AND INSTALLATION > BCM (BODY CONTROL MODULE)
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
PARTS INFORMATION
MODEL
DESCRIPTION
Pathfinder
QUANTITY
284B1-9NR3A
BCM
Titan/Titan XD
PART NUMBER
1
284B2-9FV1A
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
(1)
(2)
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Replace BCM
(1)
RD94AA
ZE
32
(2)
Reference the electronic parts catalog and use the BCM Assembly as the Primary
Failed Part (PFP).
Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time (FRT).
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
DESCRIPTION
November 7, 2019
NTB19-101
Original bulletin published
April 8, 2020
NTB19-101a
APPLIED VEHICLES, IF YOU CONFIRM, and
PARTS INFORMATION sections revised
2/2
NTB19-101a