LI54.30-N-071680

Service Bulletin Details

Public Details for: LI54.30-N-071680

Retrofitting of reversing camera - help lines/guide- lines are not displayed or are displayed incorrectly


- 2020 - 2019 -

Retrofitting of reversing camera - help lines/guidelines are not displayed or are displayed incorrectly
Topic number
LI54.30-N-071680
Version
1
Function group
54.30 Instrument cluster, display instruments, hazard
warning device
Date
09-03-2020
Validity
Model 907.1/2 with code FR7 (reversing camera pre-installation) or retrospectively added code FR8 (reversing
camera)
Reason for change
Notes under remedy have been adjusted
Reason for block
Complaint:
Help lines/guidelines are not displayed or are displayed incorrectly
Cause:
Incorrect coding in vehicle
Body/equipment mounting directives have not been observed.
Code O1N (activation of reversing camera without guidelines) has not been entered into the vehicle data card (VeDoc) and/or control unit B84/3 for the reversing camera (RVC177) had not been coded.
Remedy:
Observe the body/equipment mounting directives and WIS document AN54.65-D-0030TSC.
Notes:
•
•
•
•
•
Retrofitting of the reversing camera without the reversing aid electrical pre-installation (FR7) is not approved by
the manufacturer and may not be coded in the vehicle.
On vehicles equipped with code FR7 (reversing aid electrical pre-installation), the reversing camera can be retrofitted in accordance with WIS document AN54.65-D-0030TSC. When doing so, it is essential to enter code
O1N (activation of reversing camera without guidelines) into VeDoc and code control unit B84/3 for the reversing
camera (RVC177).
It is not possible to show help lines/guidelines on the retrofitted camera.
In VeDoc, the changing of code FR8 (reversing camera) is now locked. Adding or removing it is no longer possible.
Vehicles which have had code FR7 wrongly deleted and code FR8 added before code FR8 was locked can
be restored to the correct status (without guidelines) by adding code O1N (Activation of reversing camera without guidelines) in Vedoc and then performing SCN coding of control unit B84/3 for the reversing camera (RFK)
(RVC177).
Symptoms
09-03-2020 11:53 PM
© Copyright Mercedes-Benz AG
BSTRINE
Page 1/2
Communication/information / Assistance and warning systems / Parking assist / Reversing camera / Malfunction
Communication/information / Assistance and warning systems / Parking assist / Reversing camera / Without picture
WIS-References
Document number
Title
Note
AN54.65-D-0030TSC
Retrofit reversing camera
Allocation
Remedy
Validity
Vehicle
Engine
Transmission
Sprinter 907 - 907.123
*
*
Sprinter 907 - 907.131
*
*
Sprinter 907 - 907.133
*
*
Sprinter 907 - 907.135
*
*
Sprinter 907 - 907.141
*
*
Sprinter 907 - 907.143
*
*
Sprinter 907 - 907.145
*
*
Sprinter 907 - 907.153
*
*
Sprinter 907 - 907.155
*
*
Sprinter 907 - 907.221
*
*
Sprinter 907 - 907.223
*
*
Sprinter 907 - 907.231
*
*
Sprinter 907 - 907.233
*
*
Sprinter 907 - 907.235
*
*
Sprinter 907 - 907.241
*
*
Sprinter 907 - 907.243
*
*
Sprinter 907 - 907.245
*
*
Sprinter 907 - 907.253
*
*
Sprinter 907 - 907.255
*
*
09-03-2020 11:53 PM
© Copyright Mercedes-Benz AG
BSTRINE
Page 2/2


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.