SSM75107

Service Bulletin Details

Public Details for: SSM75107

Customers report the panoramic roof glass opening panel/sunblind has lost its one-touch operation.


- 2021 - 2020 - 2019 - 2018 - 2017 -

Models from 2021
2021 JAGUAR F-PACE
Models from 2020
2020 JAGUAR F-PACE
Models from 2019
2019 JAGUAR F-PACE
Models from 2018
2018 JAGUAR F-PACE
Models from 2017
2017 JAGUAR F-PACE
Special Service Message
NOTE: A Special Service Message is a formal communication issued by Jaguar and carries the
same importance of a Technical Service Bulletin. An SSM is a quick method of communicating
"Need To Know" information to the technical service community. SSM's may be issued in
advance of a technical bulletin or may be the only communication on a given topic. All
information contained in Jaguar technical communications are intended for use by trained,
professional technicians with the knowledge, tools, and equipment required to complete the
procedure correctly and safely. It informs the Technicians of conditions that may occur on
some vehicles, or provides information that could assist in correct vehicle and diagnostic
service.
SSM 75107 - F-Pace (X761) – Panoramic Roof Glass Opening Panel /
Sunblind Loses One Touch Operation Function
Models : F-Pace / X761
Engineer Chris Davies
Name :
Last 26 OCT 2020 21:59:54
Modified :
Category : Body
Symptom : 105000 Roof Options
Content : I s s u e:
Customers report the panoramic roof glass opening
panel / sunblind has lost its one-touch operation.
C a u s e:
The opening panel / sunblind motor loses its
synchronization.
Action:
Do not replace the panoramic roof motor or
panoramic roof frame assembly for this symptom.
Please carry out the following roof opening panel
initialization / motor synchronization procedure;
WARNING:
Make sure that the component is at ambient air
temperature.
CAUTIONS:
Make sure that the Transmission Control Switch (TCS)
is in Park (P) position.
Make sure that the selector lever is in Neutral (N)
position.
Set the ignition to the ON position.
Operate the switch, fully close the roof opening
panel and the roof panel blind(s). Release the
switches.
NOTE: If the roof opening panel does not operate after
60 seconds. Connect the Jaguar Land Rover approved
diagnostic tool, clear the Diagnostic Trouble Codes
(DTCs).
Fully press and hold the front of the roof opening
panel switch for more than 10 seconds, to start
the reset cycle. Continue to hold the front of the
roof opening panel switch.
The reset cycle will fully open the roof blind(s).
Fully open and then fully close the roof opening
panel.
Fully close the roof blind(s).
Once the open / close cycle has completed and the
roof panel blind(s) has stopped moving, release
the switch.
The roof opening panel is now synchronized.
The roof opening panel can now be operated as
normal.
A Topix update is in progress, which will supersede this
SSM.
Jaguar Land Rover Limited 2000 - 2020 (Rel. 2684)


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.