JTB00595NAS2

Service Bulletin Details

Public Details for: JTB00595NAS2

There is a wind noise from the a-pillar area or that the windshield finisher is loose.


- 2019 - 2018 - 2017 - 2016 -

Models from 2019
2019 JAGUAR XE
2019 JAGUAR XF
Models from 2018
2018 JAGUAR F-PACE
2018 JAGUAR XE
2018 JAGUAR XF
Models from 2017
2017 JAGUAR F-PACE
2017 JAGUAR XE
2017 JAGUAR XF
Models from 2016
2016 JAGUAR XF 
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
JTB00595NAS2
TECHNICAL BULLETIN
16 DEC 2020
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional
Technicians with the knowledge, tools, and equipment required to do the job properly and
safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not
be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition
described affects your vehicle. Contact an authorized Jaguar service facility to determine
whether this bulletin applies to a specific vehicle.
INFORMATION
This reissue replaces all previous versions. Please destroy all previous versions.
This bulletin supersedes TSB JTB00595NAS1/2017 dated 05 OCT 2017, which should either
be destroyed or clearly marked to show it is no longer valid (e.g. with a line across the page).
Only refer to the electronic version of this Technical Bulletin in TOPIx.
Changes are highlighted in blue
SECTION:
501-08
SUBJECT/CONCERN:
Windshield Finisher Loose
AFFECTED VEHICLE RANGE:
MODEL:
F-PACE (X761)
MODEL YEAR:
2017-2018
VIN:
045001-235216
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
ASSEMBLY PLANT:
Solihull
1/6
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
MODEL:
MODEL YEAR:
VIN:
ASSEMBLY PLANT:
XE (X760)
2017
921222-979442
Solihull
XE (X760)
2017-2019
P10168-P52488
Castle Bromwich
XF (X260)
2016-2019
Y00001-Y79026
Castle Bromwich
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
There is a wind noise from the A-pillar area or that the windshield finisher is loose.
CAUSE:
Windshield finisher retaining channel not retaining the windshield finisher correctly.
ACTION:
Follow the instructions below.
WARRANTY:
NOTES:
Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Use TOPIx to obtain
the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor
only claims must show the causal part number with a quantity of zero.
DESCRIPTION
Windshield finisher - Modification - F-PACE
(X761)
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
76.96.62
0.2
DS
T4A1105
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
2/6
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
Windshield finisher - Modification - XE
(X760)
76.96.62
0.2
DS
T4N14685
Windshield finisher - Modification - XF
(X260)
76.96.62
0.2
DS
T2H19734
DESCRIPTION
NOTE:
Normal Warranty procedures apply.
SERVICE INSTRUCTION:
1.

Remove the windshield finisher.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
3/6
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
2.

At the 6 positions shown, close the internal dimension of the windshield finisher
retaining channel on the A-pillar.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
4/6
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
3.
CAUTIONS:
Make sure to not lever against the windshield during this operation to
prevent damage to the glass.
Make sure to not damage the vehicle paintwork.

Insert a suitable, 30-40mm-wide plastic tool and pull towards the A-pillar.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
5/6
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
4.

Close the windshield finisher channel to an internal dimension of 1.5 mm.
1. Use a feeler gauge to measure the internal dimension.
5.

Install the windshield finisher.
6.
Repeat steps 1-5 to the other side of the vehicle.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124078068
6/6

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.