09-001-17
Service Bulletin Details
Public Details for: 09-001-17
Excessive condensation or water within the headlamp assembly caustion.
- 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 -
Models from 2017
| 2017 MAZDA MAZDA3 |
Models from 2016
| 2016 MAZDA MAZDA3 |
Models from 2015
| 2015 MAZDA MAZDA3 |
| 2015 MAZDA MAZDA5 |
Models from 2014
| 2014 MAZDA MAZDA2 |
| 2014 MAZDA MAZDA3 |
| 2014 MAZDA MAZDA5 |
Models from 2013
| 2013 MAZDA MAZDA2 |
| 2013 MAZDA MAZDA3 |
| 2013 MAZDA MAZDA5 |
Models from 2012
| 2012 MAZDA MAZDA2 |
| 2012 MAZDA MAZDA3 |
| 2012 MAZDA MAZDA5 |
Models from 2011
| 2011 MAZDA MAZDA2 |
| 2011 MAZDA MAZDA3 |
| 2011 MAZDA MAZDA5 |
Models from 2010
| 2010 MAZDA MAZDA3 |
| 2010 MAZDA MAZDA5 |
Models from 2009
| 2009 MAZDA MAZDA3 |
| 2009 MAZDA MAZDA5 |
Models from 2008
| 2008 MAZDA MAZDA3 |
| 2008 MAZDA MAZDA5 |
Models from 2007
| 2007 MAZDA MAZDA3 |
| 2007 MAZDA MAZDA5 |
Models from 2006
| 2006 MAZDA MAZDA5 |
Service Bulletin Mazda North American Operations Irvine, CA 92618-2922 © 2017 Mazda Motor of America, Inc. Subject: Bulletin No: EXCESSIVE CONDENSATION OR WATER WITHIN THE HEADLAMP ASSEMBLY - CAUTION Last Issued: 09-001/17 01/13/2017 MULTI-MODEL - EXCESSIVE CONDENSATION OR WATER WITHIN THE HEADLAMP ASSEMBLY CAUTION BULLETIN NOTE This bulletin supersedes the previously issued bulletin(s) listed below: The changes are noted in Red beside the change bars. Previously issued TSBs: Date issued: Previously issued TSBs: Date issued: 09-013/16 02/26/2016 09-003/13 03/04/2013 09-049/14 11/24/2014 09-005/11 02/07/2011 APPLICABLE MODEL(S)/VINS 2011-2014 Mazda2 2007-2017 Mazda6 2013-2017 CX-5 2007-2011 RX-8 2007-2017 Mazda3 2008-2011 Tribute 2007-2012 CX-7 2006-2017 MX-5 2006-2015 Mazda5 2016-2017 CX-3 2007-2017 CX-9 DESCRIPTION When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets are present and correctly installed. In most cases you will find that the Bulb Seal No. 1 (A) or HID Bulb Seal No. 1 (B) and Bulb Seal No. 2 (C) socket covers have not been correctly installed or are missing due to improper prior repairs (i.e., customer replacing the headlamp bulbs or body shop not transferring them when replacing the headlamp unit(s) due to a collision). Any damage caused by missing socket covers, HID module seal (D), or missing bumper brackets (E) is not covered by warranty policy. NOTE: LED headlamp assembly replacement part include seals. Seal transfer is not required. Page 1 of 1 CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/ equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies, customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means, electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in writing.