NTB20-043a
Service Bulletin Details
Public Details for: NTB20-043a
2014-2020 rogue; air duct replacement this bulletin has been amended. See amendment history on the last page. Please discard previous versions of this bulletin.
- 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 -
Models from 2020
2020 NISSAN ROGUE |
Models from 2019
2019 NISSAN ROGUE |
Models from 2018
2018 NISSAN ROGUE |
Models from 2017
2017 NISSAN ROGUE |
Models from 2016
2016 NISSAN ROGUE |
Models from 2015
2015 NISSAN ROGUE |
Models from 2014
2014 NISSAN ROGUE |
Classification: Reference: EM20-007a Date: NTB20-043a January 22, 2021 2014-2020 ROGUE; AIR DUCT REPLACEMENT This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. APPLIED VEHICLES: 2014-2020 Rogue (T32) NOTE: This bulletin does not apply to Rogue Hybrid (T32H). IF YOU CONFIRM Air duct 1, air duct 2, or the air cleaner cover shown in Figure 1 needs to be replaced. ACTION Inspect for a clip in the location shown in Figure 1 and Figure 2. If a clip is present, then the vehicle IS equipped with the updated parts; no further action is needed. Individual parts may be replaced as needed. If a clip is NOT present, then the vehicle is equipped with older parts. See SERVICE PROCEDURE on the next page. Clip location Air cleaner cover Air cleaner body Air duct 2 Air duct 1 Figure 1 IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/3 SERVICE PROCEDURE 1. Inspect the air cleaner body for a clip in the location shown in Figure 1 and Figure 2. If a clip is present, then the vehicle is equipped with the updated parts; no further action is needed. Individual parts may be replaced as needed. If a clip is NOT present, then the vehicle is equipped with older parts. All components listed in the PARTS INFORMATION section must be replaced. For removal and installation, refer to the Electronic Service Manual (ESM) section: REPAIR > ENGINE > ENGINE MECHANICAL > REMOVAL AND INSTALLATION > AIR CLEANER AND AIR DUCT. 2. Install the new clip into the location shown in Figure 2. Clip location Figure 2 2/3 NTB20-043a PARTS INFORMATION DESCRIPTION PART NUMBER QUANTITY DUCT ASSY-AIR DUST, SIDE 16554-4BA2C 1 DUCT ASSY-AIR DUST, SIDE 16554-4BA2E 1 CLNR ASSY-AIR 16500-4BA5D 1 CLIP TRIM 01553-2DR9A 1 CLAIMS INFORMATION Submit a Primary Part (PP) type line claim using the following claims coding: DESCRIPTION PFP OP CODE SYM DIA FRT Install parts listed in PARTS INFORMATION Only If Needed (1) DA30AA ZE 41 (2) (1) (2) Reference the electronic parts catalog and use the Air Duct Assy. (16554-*****) as the Primary Failed Part (PFP). Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat Rate Time (FRT). AMENDMENT HISTORY PUBLISHED DATE REFERENCE DESCRIPTION June 18, 2020 NTB20-043 Original bulletin published January 22, 2021 NTB20-043a Changes to APPLIED VEHICLES. 3/3 NTB20-043a