2061739/4
Service Bulletin Details
Public Details for: 2061739/4
Tpms - warning within the drivers information panel (dip) - dtc C1239f0 - tyre pressure display positioning not possible. Customer statement / workshop findings: yellow tyre pressure monitoring system (tpms) warning light is evident with
Models from 2022
2022 BENTLEY FLYING SPUR |
Models from 2021
2021 BENTLEY BENTAYGA |
2021 BENTLEY CONTINENTAL GT |
2021 BENTLEY CONTINENTAL GTC |
2021 BENTLEY FLYING SPUR |
Models from 2020
2020 BENTLEY BENTAYGA |
2020 BENTLEY CONTINENTAL GT |
2020 BENTLEY CONTINENTAL GTC |
2020 BENTLEY FLYING SPUR |
Technical product information Topic Market area Brand Transaction No. Level Status Release date TPMS - Warning within the Drivers Information Panel (DIP) - DTC C1239F0 - Tyre pressure display Positioning not possible Bentley: worldwide (2WBE) Bentley 2061739/4 EH Approval Event memory entries Diagnostic address Event memory entry Fault type Fault status 0065 - Tire Pressure Monitoring System (TPMS) C1239F0: Tire pressure display Positioning not possible 0065 - Tire Pressure Monitoring System (TPMS) C1239F0: Tire pressure display Positioning not possible Intermittent static New customer code Object of complaint running gear -> tyre monitoring -> tyre pressure monitoring running gear -> tyre monitoring -> tyre pressure monitoring -> wheel electronics learn mode running gear -> tyre monitoring -> tyre pressure monitoring -> tyre pressure display Complaint type functionality -> without function / defect functionality -> defective function sequence functionality -> without function / defect Vehicle data Bentayga - New Flying Spur - New Continental GT and GTC Sales types Type 3S3* 3S3* 3S4* 3S4* 4V1* 4V1* ZG2* ZG2* ZG2* MY 2020 2021 2020 2021 2020 2021 2020 2021 2022 Brand Designation Engine code E * E * E * E * E * E * E * E * E * Gearbox code * * * * * * * * * Final drive code * * * * * * * * * Chassis numbers Manufacturer SCB SCB SCB SCB SJA SCB Filler CS1 BN5 BR6 BM5 * * Type 3S 3S ZG 3S * * Documents Document name master.xml Filler 1 2 1 6 * * MY M N N N * * Factory C C C C * * From 000168 083265 083268 083269 034356 085037 To Prod from Prod to 000168 083265 083268 083269 999999 999999 Position Technical product information Transaction No.: 2061739/4 TPMS - Warning within the Drivers Information Panel (DIP) - DTC C1239F0 - Tyre pressure display Positioning not possible Customer statement / workshop findings Customer statement Yellow Tyre Pressure Monitoring System (TPMS) warning light is evident with the Drivers Information Panel (DIP) The warning is evident when the tyre size has been changed within the MMI For example: After changing the tyres from winter to summer variants or vice versa Workshop findings C1239F0 - Tyre pressure display Positioning not possible – Evident within address 0065 Technical background If the tyre size type in the MMI is changed a yellow TPMS warning light within the DIP will be evident The ability to drive the vehicle will not be affected. The warning light will be displayed as follows: • After a 4 minute drive cycle, The (TPMS) will enter into a partially active mode and outputs a warning within the (DIP) as shown in Figure 1 NOTE: This is a pre-warning to the customer about a potential issue with the TPMS Figure 1 • Should the TPMS control unit not receive any information after a further 5 minutes, the TPMS warning will be as shown in Figure 2 Figure 2 Production change IMPORTANT: In the event that the issue is evident and the vehicle is post the VIN’s shown within this TPI’s Header data a DISS query must be raised, await feedback before conducting any further work Measure 1) Check the part numbers of all four TPMS transmitters 433MHz frequency sensors In the event that 5Q0 907 275B are fitted raise a DISS query and await feedback from Product support before conducting any further work In the event that 5Q0 907 275F are fitted replace all four transmitters – Refer to Rep.Gr 44 (See parts information section) NOTE: Although the replacement parts have the same part number the transmitter specification has changed 315MHz frequency sensors In the event that 5Q0 907 275C are fitted raise a DISS query and await feedback from Product support before conducting any further work In the event that 5Q0 907 275G are fitted replace all four transmitters – Refer to Rep.Gr 44 (See parts information section) NOTE: Although the replacement parts have the same part number the transmitter specification has changed Warranty accounting instructions Warranty type 110 or 910 Damage service number 44 32 Damage code 00 40 Labour Labour operation code 44 32 56 00 Time Parts information 433MHz 5Q0 907 275F (Order x4) 315MHz 5Q0 907 275G (Order x4) 110 TU’s