2060458/2
Service Bulletin Details
Public Details for: 2060458/2
Water ingress onto the front reading light. Customer statement / workshop findings: water drips from the front interior light. The water drips directly from the electric drive of the front sun roof motor. Technical background: a water d
Models from 2020
2020 BENTLEY BENTAYGA |
Models from 2019
2019 BENTLEY BENTAYGA |
Models from 2018
2018 BENTLEY BENTAYGA |
Models from 2017
2017 BENTLEY BENTAYGA |
Technical product information Water ingress onto the front reading light Russische Föderation (5RU),Australia E04 Bentley rest Asia and Australia (6E04),China 796 VW Import Comp. Ltd (Vico), Beijing (6796),Germany E02 Bentley rest Europe (6E02),Japan E03 Bentley Japan (6E03),United Arab Emirates E06 Bentley Middle East and Africa (6E06),United Kingdom E01 Bentley UK (6E01),United States E05 Bentley USA and rest America (6E05) Bentley Topic Market area Brand Transaction 2060458/2 No. Level EH Status Approval Release date New customer code Object of complaint Complaint type Position roof systems, special installations -> panoramic sliding sunroof leaks roof systems, special installations -> sliding/tilting sunroof leaks Vehicle data Bentayga Sales types Type MY Brand Designation Engine code Gearbox code Final drive code 4V1* 4V1* 4V1* 4V1* 2017 2018 2019 2020 E E E E Documents Document name master.xml * * * * * * * * * * * * Technical product information Water ingress onto the front reading light Transaction No.: 2060458/2 Customer statement / workshop findings Water drips from the front interior light. The water drips directly from the electric drive of the front sun roof motor. Technical background A water drop can get onto the guide rail instead of the water flow area of the guide rail. The water runs forwards to the guide tube of the operating cable and from there onto the electric drive. Production change Change of the foam pad and its bonding, the change is in preparation. Measure Note: The following repair instructions must be carried out on the left and right hand side of the guide rail. Remedy - Manually attach 2 adhesive beads to the guide rail. 1) Completely open the front glass panel TIP: Ensure the area in which the sealant is to be applied is clean and dry also ensure any other affected components are dry and not damaged, should any issues be evident a new DISS query should be raised or the existing query should be updated ensuring all findings are clearly identified and reported • Remove the inner sound insulation to make the cartridge easier to access/move • Pull the external seal with adhesive tape back (Figure 1) and press the wind deflector down. This can also be held in the lower position with adhesive tape. Figure 1 2) Figures 2 (red lines) and 3 show the areas in which the adhesive beads have to be applied. Figure 2 Figure 3 The marked areas (red lines shown in Figure 2) have to be carefully cleaned with isopropyl D 009.401.04. 3) Then take the 1k window adhesive D 169.300.M1 and cut off the front cartridge nozzle diagonally, so that an opening of around 4mm is created (Figure 4) Figure 4 4) Referring to Figure 5 - Push the cartridge nozzle to the foam at the rear and apply the two adhesive beads to the marked points (red lines shown in Figure 2). Apply the diagonal adhesive bead at the front on the foam pad directly onto the channel to the foam pad and the guide rail. Figure 5 • Clean adhesive residues from the guide rail. The adhesive beads should only be on top of the guide rail. • Then remove the adhesive tape and fit the sound insulation. Close the glass panel. 5) Carry out a guided fault finding check to confirm there are no related DTC’s • Confirm the reading lights are operating to specification • Once the sealant has dried/cured - Check and confirm the water ingress issue is no longer evident Warranty accounting instructions Warranty type Damage code 910 or 110 00 50 Damage service number Labour Labour operation code Time 60 39 60 39 41 00 20 Time units Parts information To obtained from your local Audi Retailer Isopropyl D 009.401.04. 1k window adhesive D 169.300.M1