ITB15-014A

Service Bulletin Details

Public Details for: ITB15-014A

2013 jx35 and 2014 qx60 awd error displayed and dtc C1204 stored this bulletin has been amended. See amendment history on the last page. Please discard previous versions of this bulletin.


- 2014 - 2013 -

Models from 2013
2013 INFINITI JX35
Classification:
Reference:
Date:
TF15-002A
ITB15-014A
March 4, 2021
2013 JX35 AND 2014 QX60
AWD ERROR DISPLAYED AND DTC C1204 STORED
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Please discard previous versions of this bulletin.
APPLIED VEHICLES:
APPLIED VIN / DATE:
2013 JX35 (L50)
2014 QX60 (L50)
2014 QX60 Hybrid (L50)
Equipped with AWD
Built before 5N1(*)L0M(**)EC 548571 / August 5, 2014
IF YOU CONFIRM
The vehicle has been operated in cold weather,
below approximately -18ºC (0ºF),
AND
“AWD ERROR” is displayed in the Vehicle
Information Display,
AND
DTC C1204 (AWD Solenoid) is stored.
Figure 1
ACTION
Replace the AWD Control Unit.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing.
You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to
successfully completing this repair.
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that
a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti dealer to determine if this
applies to your vehicle.
1/3
SERVICE PROCEDURE
1. Replace the AWD Control Unit with the one listed in the PARTS INFORMATION below (see Figure 2).

Refer to the Electronic Service Manual (ESM), section DLN-Driveline, for replacement information.
AWD Control Unit
A: Rear storage area, rear
panel near the rear door latch
Figure 2
PARTS INFORMATION
DESCRIPTION
PART NUMBER
QUANTITY
Controller Assy - Torque Split
41650-***** (1)
1
(AWD Control Unit)
(1) Use the VIN and the electronic parts catalog to obtain the correct part number for the vehicle you are
working on.
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Replace Torque Split Control Unit
(1)
RS36AA
ZE
32
(2)
(1) Reference the electronic parts catalog and use the Torque Split Control Unit (41650-*****) as the Primary
Failed Part (PFP).
(2) Reference the current Infiniti Warranty Flat Rate Manual and use the indicated flat rate time.
2/3
ITB15-014A
AMENDMENT HISTORY
PUBLISHED DATE
REFERENCE
DESCRIPTION
March 17, 2015
ITB15-014
Original bulletin published
March 4, 2021
ITB15-014A
PARTS INFORMATION and CLAIMS INFORMATION
revised
3/3
ITB15-014A


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.