N094NAS1
Service Bulletin Details
Public Details for: N094NAS1
Second row seating function.
- 2017 -
Models from 2017
2017 LAND ROVER DISCOVERY |
11/1/2017 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx N094NAS1 TECHNICAL BULLETIN 12 OCT 2017 © Jaguar Land Rover North America, LLC NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Land Rover service facility to determine whether this bulletin applies to a specific vehicle. I N F O R M AT I O N SECTION: 501-10: Seating S U B J E C T/ C O N C E R N : Service Action: Second Row Power Seat Function AFFECTED VEHICLE RANGE: MODEL: Discovery (LR) MODEL YEAR: 2017 VIN: 019608-023776 https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 ASSEMBLY PLANT: Solihull APPLICABILITY: Solihull 1/12 11/1/2017 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx MARKETS: NORTH AMERICA CONDITION SUMMARY: SITUATION: An issue has been identified on certain vehicles within the listed Affected Vehicle Range where the powered tilt and slide operation on the second row seating may not operate. The manual function will still be available to allow third row passengers to exit the vehicle. ACTION: Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the Workshop Procedure detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI) process but must have it completed prior to vehicle handover to the customer. Affected vehicles already in the hands of customers should be updated at the next available opportunity. SPECIAL TOOLS: Refer to TOPIx Workshop Manual/Workshop Procedure for any required special tools. PA RTS : NOTE: Order only the expected percentage demand of parts identified. DESCRIPTION Cable - Seat Back Latch Release PART NO./SUNDRY CODE LR109311 https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 QTY./VALUE *1 EXPECTED % OF VEHICLES REQUIRING PARTS 100 2/12 11/1/2017 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx * - quantity of '1' includes the 2 cables to complete repairs. WARRANT Y: NOTE: Check DDW to ensure that a vehicle is affected by this program prior to undertaking any rework action. At the time of confirming a booking for vehicle repair, ensure that all outstanding Recall and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit. Warranty claims must be submitted quoting the Program Code together with the relevant Option Code. The SRO and parts information is included for information only. The Option Code(s) that allows for the drive in/drive out allowance can only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken. Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair time. This program is valid for a limited time only. Warranty claims with a repair date prior to the 30 September 2019 closure date must be submitted or payment within 30 calendar days of completion of the repair. PROGRAM CODE OPTION CODE DESCRIPTION SRO TIME (HOURS) PARTS/SUNDRY CODE QTY./VALUE N094 B Cable - Second Row Seat - Powered Sliding - Pair Renew 78.85.89.70 0.2 LR109311 1 N094 C Cable - Second Row Seat - Powered Sliding - Pair Renew Drive In/Drive Out 78.85.89.70 02.02.02 0.2 0.2 LR109311 - 1 - Normal Warranty policies and procedures apply. https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 3/12 11/1/2017 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx WORKSHOP PROCEDURE: NOTE: Left shown; right similar. 1 Open the rear left door. 2 Adjust the second row left seat to the furthest forward position. 3 Release the 2 clips retaining the second row left seat cushion. https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 4/12 11/1/2017 4 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx Remove the second row left seat cushion. Disconnect the wiring harness (if equipped). 5 NOTE: Do not fully remove the 2 nuts. https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 5/12 11/1/2017 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx Loosen the 2 nuts securing the second row left seat motor. 6 NOTE: Take note of the cable routing. https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 6/12 11/1/2017 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx Release the upper end of the second row left seat cable (1) from the bracket and release the 'S' style hook (2) from the actuator arm. https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 7/12 11/1/2017 7 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx Release the lower end of the second row left seat cable (1) from the bracket and release the clip (2). Remove and discard the original second row left seat cable. https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 8/12 11/1/2017 8 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx Install the clip (1) at the lower end of the replacement second row left seat cable, then install the outer cable clip (2) into the bracket. 9 NOTE: Make sure to route the replacement second row seat cable as previously noted. https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 9/12 11/1/2017 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx Install the 'S' style hook (1) on the upper end of the replacement left seat cable into the actuator arm and then install the outer cable clip (2) into the bracket. https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 10/12 11/1/2017 10 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx Install the 2 nuts securing the second row left seat motor. Torque: 12 Nm 11 Install the seat cushion wiring harness (if equipped) and the second row left seat cushion. https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 11/12 11/1/2017 12 N094NAS1 - Service Action: Second Row Power Seat Function | TOPIx Make sure the 2 clips are correctly latched. 13 Adjust the second row left seat to the desired position. 14 Repeat steps 1-13 for the second row right seat. https://topix.landrover.jlrext.com/topix/content/document/view?id=830624 12/12