JLRTB02068NAS1

4/19/2021
TECHNICAL BULLETIN
JLRTB02068NAS1
TECHNICAL BULLETIN
19 APR 2021
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional
Technicians with the knowledge, tools, and equipment required to do the job properly and
safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not
be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition
described aﬀects your vehicle. Contact an authorized Land Rover service facility to
determine whether this bulletin applies to a speciﬁc vehicle.
INFORMATION
SECTION:
303-13
SUBJECT/CONCERN:
Malfunction Indicator Lamp (MIL) Illuminated on the Instrument Panel Cluster (IPC)
AFFECTED VEHICLE RANGE:
MODEL:
MODEL
YEAR:
VIN:
ASSEMBLY
PLANT:
APPLICABILITY:
Range
Rover
(LG)
20132018
100000399999
Solihull
INGENIUM I4 2.0L Petrol - PHEV/V6 S/C 3.0L Petrol
/V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol
Range
Rover
(LG)
20182020
500000599999
Solihull
INGENIUM I4 2.0L Petrol - PHEV/INGENIUM I6 3.0L
Petrol/V8 S/C 5.0L Petrol
Range
Rover
(LG)
2020
499999414799
Solihull
INGENIUM I4 2.0L Petrol - PHEV/INGENIUM I6 3.0L
Petrol/V8 S/C 5.0L Petrol
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616167287172
1/8
4/19/2021
TECHNICAL BULLETIN
MODEL:
MODEL
YEAR:
VIN:
ASSEMBLY
PLANT:
APPLICABILITY:
Range
Rover
Sport
(LW)
20142019
300000699999
Solihull
INGENIUM I4 2.0L Petrol - High Power/INGENIUM I4
2.0L Petrol - PHEV/INGENIUM I6 3.0L Petrol/V6 S/C
3.0L Petrol /V8 S/C 5.0L Petrol
Range
Rover
Sport
(LW)
20162018
100000199999
Solihull
INGENIUM I4 2.0L Petrol - High Power/INGENIUM I4
2.0L Petrol - PHEV/INGENIUM I6 3.0L Petrol/V6 S/C
3.0L Petrol /V8 S/C 5.0L Petrol
Range
Rover
Sport
(LW)
20182020
800000899999
Solihull
INGENIUM I4 2.0L Petrol - High Power/INGENIUM I4
2.0L Petrol - PHEV/INGENIUM I6 3.0L Petrol/V6 S/C
3.0L Petrol /V8 S/C 5.0L Petrol
Range
Rover
Sport
(LW)
2020
700000748505
Solihull
INGENIUM I4 2.0L Petrol - High Power/INGENIUM I4
2.0L Petrol - PHEV/INGENIUM I6 3.0L Petrol/V8 S/C
5.0L Petrol
Discovery
(LR)
20172019
000532096625
Solihull
INGENIUM I4 2.0L Petrol - High Power/V6 S/C 3.0L
Petrol
Discovery
(LR)
20192020
400085443228
Nitra
(Slovakia)
INGENIUM I4 2.0L Petrol - High Power/V6 S/C 3.0L
Petrol
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
The Malfunction Indicator Lamp (MIL) is illuminated on the Instrument Panel Cluster (IPC),
with the following Diagnostic Trouble Code(s) (DTC)s may be stored in the Powertrain
Control Module (PCM):
• P2402-00
• P2404-00
• P2405-00
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616167287172
2/8
4/19/2021
TECHNICAL BULLETIN
• P2406-00
• P2407-00
CAUSE:
Contaminant ingress through the dust ﬁlter.
ACTION:
Follow the instructions below.
PARTS:
PART NUMBER
DESCRIPTION
QUANTITY
WTR500030
Diagnostic Module Tank Leakage (DMTL) pump
1
LR155089
DMTL pump dust ﬁlter cover
1
WARRANTY:
NOTES:
Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Use TOPIx to obtain
the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor
only claims must show the causal part number with a quantity of zero.
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
Range Rover and Discovery - Renew DMTL
pump and install cover
99.01.40
0.5
AK
WTR500030
Range Rover Sport - Renew DMTL pump and
install cover
99.01.40
0.8
AK
WTR500030
DESCRIPTION
NOTE:
Normal Warranty procedures apply.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616167287172
3/8
4/19/2021
TECHNICAL BULLETIN
SERVICE INSTRUCTION:
1.
NOTE:
The rear wheel arch liner may also be known as the rear fender splash
shield in TOPIx.
Remove the rear wheel arch liner (see TOPIx Workshop Manual section 501-08:
Exterior Trim and Ornamentation - Removal and Installation - Rear Wheel Arch
Liner
2.

Disconnect the electrical connector and release the wiring harness.
Release the vacuum hose from the Diagnostic Module Tank Leakage (DMTL)
ﬁlter.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616167287172
4/8
4/19/2021
TECHNICAL BULLETIN
3.

Remove the evaporative emissions canister assembly.
Remove the bolt.
Torque: 9 Nm
Remove the 2 nuts.
Torque: 9 Nm
Release the evaporative emission canister.
Disconnect and release the vacuum hoses.
4.

Release the vacuum 2 hoses from the DMTL pump.
If installed, remove the 2 bolts.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616167287172
5/8
4/19/2021
TECHNICAL BULLETIN
5.

Remove the DMTL pump and evaporative emission canister bracket.
Remove the 2 bolts.
6.

Remove and discard the DMTL pump.
Remove the 3 screws.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616167287172
6/8
4/19/2021
TECHNICAL BULLETIN
7.

Install the new DMTL pump to the bracket.
Install the 3 screws.
Torque: 1.8 Nm
8.

Install the DMTL pump and evaporative emission canister bracket to the
evaporative emission canister assembly.
Install the 2 bolts.
Torque: 4.5 Nm
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616167287172
7/8
4/19/2021
TECHNICAL BULLETIN
9.

Install the vacuum 2 hoses to the DMTL pump.
If installed, install the 2 bolts.
Torque: 4.5 Nm
10.

Install the DMTL pump dust ﬁlter cover.
Make sure the DMTL dust ﬁlter cover clip is secured, as shown in the
illustration.
11.
To install the evaporative emission canister assembly, reverse steps 1 to 3.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616167287172
8/8