ITB12071

Classificatio n:
Reference:
Date:
BT12-019
ITB12-071
October 25, 2012
2011 - 2013 QX56 DOOR MIRROR; GLASS MIRROR SERVICE INFORMATION
APPLIED VEHICLE: 2011- 2013 QX56 (Z62)
SERVICE INFORMATION
Part of the procedure to remove the glass mirror in
either door mirror of an applied vehicle has been
changed. Until the related Electronic Service Manuals
(ESM) are amended, use the information in this
bulletin.
•
Other than noted, all other procedural steps
in the ESM remain the same.
•
See page 2 for details.
Figure 1
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe
that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti dealer to determine if this
applies to your vehicle.
1/2
Other than noted below, follow all other steps in the
glass mirror removal procedure in the L DRIVER
CONTROLS > MIR Mirrors section of the related
ESM.
Glass mirror
Figure 2 shows the incorrect location of placing a
screwdriver or suitable tool for prying.
Figure 2
Figure 3 and 4 show proper pry tool location.
Protective tape
OK
Figure 3; viewed from bottom
Glass mirror
Door mirror motor
Figure 4; upside down, rear view
2/2
ITB12-071