ITB13013
Service Bulletin Details
Public Details for: ITB13013
Service information improper adjustment or operation of the ascd brake switch can cause the automatic speed control device (ascd) to "not set" and/or dtc P0605 (ecm) to store. See this bulletin for further detail.
- 2013 - 2012 - 2011 - 2010 - 2009 -
Models from 2011
2011 INFINITI EX35 |
2011 INFINITI G37 |
2011 INFINITI QX56 |
Class ification: Refere nc e: Date : EL13-009 ITB13-013 April 4, 2013 CRUISE CONTROL WILL NOT SET AND DTC P0605 IS STORED APPLIED VEHICLES: All Infiniti, 2009 and newer SERVICE INFORMATION Improper adjustment or operation of the ASCD brake switch can cause the Automatic Speed Control Device (ASCD) to “not set” and/or DTC P0605 (ECM) to store. If a malfunction in the ASCD system is detected, the “CRUISE” indicator may stay ON and the “SET” indicator may flash. Before replacing the Engine Control Module (ECM) for a DTC P0605: First, check the ASCD brake switch for proper operation and adjustment. • Refer to the appropriate Service Manual for ASCD brake switch operation and adjustment information. • Make sure the switch operates correctly. • Make sure the clearance gap of the switch is adjusted correctly. If the ASCD brake switch is not the cause of the issue, refer to the appropriate Service Manual for additional diagnostic and repair information. Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti dealer to determine if this applies to your vehicle. 1/1