NTB14019

Classification:
Reference:
AT13-021
Date:
NTB14-019
March 21, 2014
2014 ROGUE;
MIL ON WITH DTC P2765, P0500, P1574, P1715 OR P0720
APPLIED VEHICLES:
2014 Rogue (T32)
APPLIED TRANSMISSION: CVT8
IF YOU CONFIRM
The MIL is on with any one of these DTCs alone, or any combination of any of DTCs:





P2765 – CLUTCH B SPEED SENSOR
P0500 – VEH SPEED SEN/CIRC
P1574 – ASCD VHL SPD SEN
P1715 – INPUT SPEED SENSOR
P0720 – VEH SPD SEN/CIR
And

Moisture and/or corrosion is present on or around the Secondary Speed Sensor
pins.
ACTION
a. Remove the moisture from the
Harness connector with CRC QD
(or equivalent) electric cleaner.
b. Replace Secondary Speed Sensor
shown in Figure 1.
NOTE: Figure 1 is for reference
only.
Figure 1
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
PARTS INFORMATION
DESCRIPTION
Secondary Speed Sensor
PART #
31935 – 1XF00
QUANTITY
1
CLAIMS INFORMATION
OPERATION
Replace Secondary Speed Sensor
OP CODE
JD75AA
PFP
31935-1XF00
SYM
HC
DIA
32
(1) Reference the current Nissan Warranty Flat Rate Manual and use the indicated flat rate
time.
2/2
NTB14-019
FRT
(1)