ITB14038
Service Bulletin Details
Public Details for: ITB14038
Service information when replacing a bcm for any reason and the original bcm?S configuration cannot be accessed with consult-iii plus (c-iii plus), the new bcm must be manually configured. Configuration settings are not "spelled out" i
Models from 2015
2015 INFINITI Q50 |
2015 INFINITI Q50 HYBRID |
Models from 2014
2014 INFINITI Q50 |
2014 INFINITI Q50 HYBRID |
Classification: Reference: Date: EL14-035 ITB14-038 August 6, 2014 2014 -2015 Q50 AND Q50 HYBRID; BCM MANUAL CONFIGURATION SERVICE INFORMATION APPLIED VEHICLES: 2014-2015 Q50 (V37) 2014-2015 Q50 Hybrid (V37) SERVICE INFORMATION When replacing a BCM for any reason and the original BCM’s configuration cannot be accessed with CONSULT-III plus (C-III plus), the new BCM must be manually configured. Configuration settings are not “spelled out” in C-III plus. For example, under Intelligent Key Type the designation “0” is used in place of “without I-KEY”. Currently, the Electronic Service Manual (ESM) does not have a definition chart. The ESM will be updated with this information. Updated ESMs will be distributed to the field as quickly as possible. Until the updated ESMs are made available, please use the chart on the next page to assist in performing a manual configuration on the applied vehicles listed above. Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti dealer to determine if this applies to your vehicle. 1/2 CONSULT-III plus BCM Configuration Definition Chart For additional information, see NOTES below this chart. ITEM Key Fob Frequency Type Remote Keyless Entry Receiver One Touch Unlock Sensor Intelligent Key Type Alt Type Transmission Auto Crank Time ITEM VALUE CONSULT-III plus VALUE 0 = 314.85MHz 1 = 315MHz 2 = 433.92MHz MODE1 MODE2 MODE3 0 = Integrated 1 = Conv 2 = Integrated + Conv (for Trunk) 3 = Conv + Conv (for Trunk) MODE1 MODE2 MODE3 MODE4 0 = without 1 = 2 door type 2 = 4 door type WITHOUT MODE1 MODE2 0 = without I-KEY 1 = Half I-KEY 2 = Full I-KEY WITHOUT MODE1 MODE2 0 = gasoline 1 = diesel GASOLINE DIESEL 0 = MT without ABS/VDC (without TCU) 1 = MT with ABS/VDC (without TCU) 2 = AT without ABS/VDC (with TCU) 3 = AT with ABS/VDC (without TCU) 4 = AT Mild_HEV 5 = AT Full_ HEV 6 = Auto MT 7 = EV with PBW 8 = AT_Daimler_PT 9 = MT_Daimler_PT 0 = setting 1 (5 sec) for Gasoline 1 = setting 2 (15 sec) for Diesel 2 = setting 3 (30 sec) for HEV MT w/o ABS MT with ABS AT w/o ABS AT with ABS AT and HEV (TYPE1) AT and HEV (TYPE2) TRANSMISSION EV AT (TYPE1) MT (TYPE1) MODE1 MODE2 MODE3 NOTES: Key Fob Frequency Type: Only 315Hz/MODE 2 applies. Remote Keyless Entry Receiver: This selection will not show up on C-III plus. One Touch Unlock Sensor: Only 2 door type/MODE 2 applies. This selection will not show up on C-III plus. Intelligent Key Type: Only Full I-KEY/MODE 2 applies. This selection will not show up on C-III plus. Alt (Alternator) Type: Only gasoline/GASOLINE applies at this time. This selection may not show up on C-III plus. Transmission: Only # 2, 3, and 5 apply. Auto Crank Time: Only “setting 1 (5 sec) for Gasoline/MODE 1” and “setting 3 (30 sec) for HEV/MODE 3” applies. 2/2 ITB14-038