SSM75682
Service Bulletin Details
Public Details for: SSM75682
Transfer case judder/vibrations when a right or left steering input is applied at low speed.
- 2022 - 2021 - 2020 - 2019 - 2018 - 2017 -
Models from 2022
2022 JAGUAR F-PACE |
2022 JAGUAR XE |
2022 JAGUAR XF |
Models from 2021
2021 JAGUAR F-PACE |
2021 JAGUAR XE |
2021 JAGUAR XF |
Models from 2020
2020 JAGUAR F-PACE |
2020 JAGUAR XE |
2020 JAGUAR XF |
Models from 2019
2019 JAGUAR F-PACE |
2019 JAGUAR XE |
2019 JAGUAR XF |
Models from 2018
2018 JAGUAR F-PACE |
2018 JAGUAR XE |
2018 JAGUAR XF |
Models from 2017
2017 JAGUAR F-PACE |
2017 JAGUAR XE |
2017 JAGUAR XF |
Special Service Message NOTE: A Special Service Message is a formal communication issued by Jaguar and carries the same importance of a Technical Service Bulletin. An SSM is a quick method of communicating "Need To Know" information to the technical service community. SSM's may be issued in advance of a technical bulletin or may be the only communication on a given topic. All information contained in Jaguar technical communications are intended for use by trained, professional technicians with the knowledge, tools, and equipment required to complete the procedure correctly and safely. It informs the Technicians of conditions that may occur on some vehicles, or provides information that could assist in correct vehicle and diagnostic service. SSM 75682 - Transfer Case Judder with Steering Input Applied Models : F-Pace / X761 XE / X760 XF / X260 Engineer Hooper Tristan Name : Last Modified 15 FEB 2022 16:42:17 : Category : Driveline Symptom : 508000 Transfer Case Concerns Content : Issue: JLR is investigating customers reporting Transfer Case Judder/Vibrations when a right or left steering input is applied at low speed Cause: Transfer case locking torque with steering applied at low speed causing driveline wind-up which may lead to judder at low speed. Action: Update the Anti-lock Brake System (ABS) module software. This procedure requires a minimum of Pathfinder build 366 loaded or later. Connect the JLR approved battery support unit. Connect the JLR approved diagnostic equipment to the vehicle and begin a new session. Follow the JLR approved diagnostic equipment prompts. Select 'ECU Diagnostics'. Select ‘Anti-lock Brake System (ABS) ' Select 'Update ECU'. Follow all on-screen instructions to complete the task. When all of the tasks are complete, exit the session. Disconnect the JLR approved diagnostic equipment and the JLR approved battery support unit. Thank you for your assistance with this matter. Jaguar Land Rover Limited 2000 - 2021 (Rel. 2696)