SSM61577

Service Bulletin Details

Public Details for: SSM61577

Error during key programing


- 9999 - 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 - 1999 - 1998 - 1997 - 1996 - 1995 - 1994 - 1993 - 1992 - 1991 - 1990 - 1989 - 1988 - 1987 - 1986 - 1985 - 1984 - 1983 - 1982 -

Models from 2022
2022 JAGUAR XJ
Models from 2021
2021 JAGUAR XJ
Models from 2020
2020 JAGUAR XJ
Models from 2019
2019 JAGUAR XJ
Models from 2018
2018 JAGUAR XJ
Models from 2017
2017 JAGUAR XJ
Models from 2016
2016 JAGUAR XJ
Models from 2015
2015 JAGUAR XJ
Models from 2014
2014 JAGUAR XJ
Models from 2013
2013 JAGUAR XJ
Models from 2012
2012 JAGUAR XJ
Models from 2011
2011 JAGUAR XJ
Models from 2010
2010 JAGUAR XJ
Models from 2009
2009 JAGUAR XJ
Models from 1998
1998 JAGUAR XJ
Models from 1997
1997 JAGUAR XJ
Models from 1996
1996 JAGUAR XJ
Models from 1995
1995 JAGUAR XJ
Models from 1994
1994 JAGUAR XJ
Models from 1993
1993 JAGUAR XJ
Models from 1992
1992 JAGUAR XJ
Models from 1991
1991 JAGUAR XJ
Models from 1990
1990 JAGUAR XJ
Models from 1989
1989 JAGUAR XJ
Models from 1988
1988 JAGUAR XJ
Models from 1987
1987 JAGUAR XJ
Models from 1986
1986 JAGUAR XJ
Models from 1985
1985 JAGUAR XJ
Models from 1984
1984 JAGUAR XJ
Models from 1983
1983 JAGUAR XJ
Models from 1982
1982 JAGUAR XJ
TOPIx - SSM61577 - 4-36 Error during Key Programming
Page 1 of 1
Reference SSM61577
X-TYPE / X400
S-TYPE / X200
Models XK-SERIES / X100
XJ / X350
XJ V8 / X308
Title 4-36 Error during Key Programming
Category Diagnostic Software Hardware
Last modified 17-Dec-2012 00:00:00
Symptom 000101 Diagnostic Concerns
4-36 Error during Key Programming
Issue:
IDS/SDD reports 4-36 error during key
programming on legacy Jaguar models.
Cause:
This error indicates there is a
communication problem between the
diagnostic tool and the GEM/Body module.
Most often this occurs on vehicles with no
existing keys where the vehicle security
system is still set into an ARMED state.
Content
It can also occur when there are functional
problems with the wiring or GEM itself.
Solution:
To overcome the “vehicle armed”
condition, ensure the vehicle is disarmed
by inserting a key into the driver’s door
lock cylinder, then lock and unlock the
driver’s door.
After this action is completed, repeat the
key programming procedure as required.
If problems still persist open a TA request
with the Jaguar Technical Helpline, and
attach diagnostic session files to expedite
the process.
http://topix.jaguar.jlrint.com/topix/service/archive/226777/index
1/3/2013


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.