M-265-001

Service Bulletin Details

Public Details for: M-265-001

2008 document reformated to be published as a tsb in impact. All cxu, chu, & gu models built before may 2007. Charge air cooler mounting hardware kit.


- 2008 - 2007 -

IMPACT 4.07.140
7/5/2022
Printed by:William Cheek
Service
Chassis ID
Path
2651/Technical service bulletins//Charge Air Cooler Revision
Model
Identity
164544237
Publish date
6/30/2022
ID/Operation
M-265-001
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
1/3
IMPACT 4.07.140
7/5/2022
Charge Air Cooler Revision
M-265-001
June 2022
Valid for
All CXU, CHU, & GU Models built before May 2007
Case description
A revised charge air cooler (part Nos. 20956580 and 20956585) was implemented into production on all CXU, CHU
and GU model chassis. This revised charge air cooler includes a redesigned upper mounting area, whereby the
shoulder bolt and bushing arrangement was changed to sleeved washers and mounting bolts. Should replacement of
a charge air cooler on a CXU, CHU and GU model manufactured prior to May 2007 be required, the existing shoulder
bolts and bushings must be replaced with the sleeved washers and mounting bolts. An upper mounting hardware kit
(part No. 85111312), which contains four sleeved washers and four mounting bolts, is available through the MACK
Parts System.
Repair
Charge Air Cooler Mounting Arrangement (Previous Design Shown on Left)
Key
1
2
Qty. Part No.
Description
Replaces
1 20956580 Charge air cooler, 20750095
long
1 20956585 Charge air cooler, 20750102
short
1 85111312
Kit, upper
mounting
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
2/3
IMPACT 4.07.140
7/5/2022
hardware
(includes four
bolts and four
sleeved washers)
Issued by
Technical Service
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
3/3


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.