MC610522
Service Bulletin Details
Public Details for: MC610522
Due to a hardware change to the angular rate sensor, certain sub functions will not be active until after a software update.
- 2023 - 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 -
Models from 2023
2023 BMW F 750 GS |
2023 BMW F 850 GS |
2023 BMW F 850 GS ADVENTURE |
2023 BMW F 900 R |
2023 BMW F 900 XR |
2023 BMW K 1600 B |
2023 BMW K 1600 GT |
2023 BMW K 1600 GTL |
Models from 2022
2022 BMW K 1600 B |
2022 BMW K 1600 GT |
2022 BMW K 1600 GTL |
Models from 2021
2021 BMW F 750 GS |
2021 BMW F 850 GS |
2021 BMW F 850 GS ADVENTURE |
2021 BMW F 900 R |
2021 BMW F 900 XR |
2021 BMW K 1600 B |
2021 BMW K 1600 GT |
2021 BMW K 1600 GTL |
Models from 2020
2020 BMW F 750 GS |
2020 BMW F 850 GS |
2020 BMW F 850 GS ADVENTURE |
2020 BMW F 900 R |
2020 BMW F 900 XR |
2020 BMW K 1600 B |
2020 BMW K 1600 GT |
2020 BMW K 1600 GTL |
Models from 2018
2018 BMW K 1600 B |
2018 BMW K 1600 GT |
2018 BMW K 1600 GTL |
Models from 2017
2017 BMW K 1600 GT |
2017 BMW K 1600 GTL |
Models from 2016
2016 BMW K 1600 GT |
2016 BMW K 1600 GTL |
Models from 2015
2015 BMW K 1600 GT |
2015 BMW K 1600 GTL |
Models from 2014
2014 BMW K 1600 GT |
2014 BMW K 1600 GTL |
Models from 2013
2013 BMW K 1600 GT |
2013 BMW K 1600 GTL |
Models from 2012
2012 BMW K 1600 GT |
2012 BMW K 1600 GTL |
Models from 2011
2011 BMW K 1600 GT |
2011 BMW K 1600 GTL |
1/3/23, 11:05 AM 61 05 22_STOP SALE - SOFTWARE UPDATE - ANGULAR RATE SENSOR SIB 61 05 22 STOP SALE - SOFTWARE UPDATE - ANGULAR RATE SENSOR 2022-12-08 This Service Information Bulletin replaces SIB 61 05 22 dated July 26, 2022. What’s New: F models added to Bulletin MODEL Model K48 K61 K80 K81 K82 K83 K84 Model Description K 1600 GT/GTL K 1600 B F 750 GS F 850 GS F 850 GS ADVENTURE F 900 R F 900 XR The affected vehicles have been marked with campaign number 1361980100 in AIR. In order to determine if a specific vehicle is affected by this campaign it will be necessary to verify the vehicle VIN in AIR (Aftersales Information Research). Based on the response of the system, either proceed with the repair or take no further action. Please note, open campaigns or vehicle stops may not appear in DCS Warranty Vehicle Inquiry or sales systems until 24-72 hours after they are announced, therefore AIR is always the recommended method for determining open campaigns and vehicle stops. SITUATION Due to a hardware change to the angular rate sensor, certain sub functions will not be active until after a software update. K 1600 GT/GTL/B Sub function “Front Wheel Lift Detection” of the Pro Driving Modes is not activated. F 750 GS, F 850 GS/ ADVENTURE, F 900 R/XR Sub function DTC Dynamic Traction Control is missing. Because of this missing sub function these units are affected by STOP130008 delivery stop. PROCEDURE The engine control unit (DME) must be updated to I-Level K001-22-07-506 or better using vehicle specific labor operation “61 00 510 Programming control units of vehicle”. The corresponding software I-Level K001-22-07-506 is available. This software update must be completed prior to delivery to the customer. Copyright ©2022 MOTORRAD USA, a division of BMW of North America, LLC. All Rights Reserved about:blank 1/3 1/3/23, 11:05 AM 61 05 22_STOP SALE - SOFTWARE UPDATE - ANGULAR RATE SENSOR CLAIM INFORMATION Please submit claims via the normal claim process using the information below: Defect code 13 61 98 01 00 Labor Operation 61 00 002 +61 00 502 +61 00 510 +46 52 510 Updating Software Version Checking the Software Checking the Software Programming control units of vehicle (along with testing software Mounting and dismounting the rear wheel stand with special tools (for motorcycles without a center stand) Refer to AIR for FRU Refer to AIR for FRU Refer to AIR for FRU Refer to AIR for FRU FRUs includes all repair procedures to complete the task with allowance for necessary ancillary tasks (e.g., visual inspection, lubrication, cleaning parts etc.) and administrative tasks. Labor operation code 61 00 002 is a Main labor operation. If you are using a Main labor code for another repair, use the Plus code labor operation instead. QUESTIONS REGARDING THIS BULLETIN Technical inquiries Warranty inquiries Parts inquiries Contact the BMW Technical Support Group via TSARA Submit an IDS ticket to the Warranty Department Submit an IDS ticket to the Motorrad Parts Department Supporting Materials picture_as_pdf V2 61 05 22 Software Update - Angular Rate Sensor.pdf Copyright ©2022 MOTORRAD USA, a division of BMW of North America, LLC. All Rights Reserved about:blank 2/3 1/3/23, 11:05 AM 61 05 22_STOP SALE - SOFTWARE UPDATE - ANGULAR RATE SENSOR Copyright ©2022 MOTORRAD USA, a division of BMW of North America, LLC. All Rights Reserved about:blank 3/3 Service Information Bulletin December 8, 2022 General Electrical Systems 61 05 22 STOP SALE - SOFTWARE UPDATE – ANGULAR RATE SESNOR This Service Information Bulletin replaces SIB 61 05 22 dated July 26, 2022. What’s New: • F models added to Bulletin MODEL Model K48 K61 K80 K81 K82 K83 K84 Model Description K 1600 GT/GTL K 1600 B F 750 GS F 850 GS F 850 GS ADVENTURE F 900 R F 900 XR The affected vehicles have been marked with campaign number 1361980100 in AIR. In order to determine if a specific vehicle is affected by this campaign it will be necessary to verify the vehicle VIN in AIR (Aftersales Information Research). Based on the response of the system, either proceed with the repair or take no further action. Please note, open campaigns or vehicle stops may not appear in DCS Warranty Vehicle Inquiry or sales systems until 24-72 hours after they are announced, therefore AIR is always the recommended method for determining open campaigns and vehicle stops. SITUATION Due to a hardware change to the angular rate sensor, certain sub functions will not be active until after a software update. K 1600 GT/GTL/B Sub function “Front Wheel Lift Detection” of the Pro Driving Modes is not activated. F 750 GS, F 850 GS/ ADVENTURE, F 900 R/XR Sub function DTC Dynamic Traction Control is missing. Because of this missing sub function these units are affected by STOP130008 delivery stop. PROCEDURE The engine control unit (DME) must be updated to I-Level K001-22-07-506 or better using vehicle specific labor operation “61 00 510 Programming control units of vehicle”. The corresponding software I-Level K001-22-07-506 is available. © 2022, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution. All pricing subject to change. Page | 1 This software update must be completed prior to delivery to the customer. CLAIM INFORMATION Please submit claims via the normal claim process using the information below: Defect code 13 61 98 01 00 Updating Software Version Labor Operation 61 00 002 Checking the Software +61 00 502 Checking the Software +61 00 510 Programming control units of vehicle (along with testing software +46 52 510 Mounting and dismounting the rear wheel stand with special tools (for motorcycles without a center stand) Refer to AIR for FRU Refer to AIR for FRU Refer to AIR for FRU Refer to AIR for FRU FRUs includes all repair procedures to complete the task with allowance for necessary ancillary tasks (e.g., visual inspection, lubrication, cleaning parts etc.) and administrative tasks. Labor operation code 61 00 002 is a Main labor operation. If you are using a Main labor code for another repair, use the Plus code labor operation instead. QUESTIONS REGARDING THIS BULLETIN Technical inquiries Warranty inquiries Parts inquiries Contact the BMW Technical Support Group via TSARA Submit an IDS ticket to the Warranty Department Submit an IDS ticket to the Motorrad Parts Department © 2022, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution. All pricing subject to change. Page | 2