A0123802069038_4
Service Bulletin Details
Public Details for: A0123802069038_4
Models from 2020
2020 AUDI Q7 |
2020 AUDI Q8 |
Models from 2019
2019 AUDI A6 |
2019 AUDI A7 |
2019 AUDI Q8 |
Technical Service Bulletin 01 MIL on; cylinder misfires (DTCs P0300, P0301, P0302, P0303, P0304, P0305, P0306) 01 23 80 2069038/4 October 2, 2023. Supersedes Technical Service Bulletin Group 01 number 23-61 dated July 17, 2023 for reasons listed below. Model(s) Year Q8 2019 – 2021 A6, and A7 2019 2021 Q7 2020 – 2021 A6 allroad 2021 VIN Range Vehicle-Specific Equipment All Not Applicable Condition REVISION HISTORY Revision Date Purpose 4 - Revised header (Updated Models) Revised Warranty (Updated claim types) 3 07/17/2023 Revised header (Updated Models) Revised Service (added instructions for Q8) 2 01/06/2023 Revised header (Updated Filter) Customer states: MIL is illuminated. Workshop findings: The following DTCs may be stored: • DTC P0300: Random/Multiple Cylinder Misfire Detected • DTC P0301: Cyl.1 Misfire Detected • DTC P0302: Cyl.2 Misfire Detected • DTC P0303: Cyl.3 Misfire Detected • DTC P0304: Cyl.4 Misfire Detected • DTC P0305: Cyl.5 Misfire Detected • DTC P0306: Cyl.6 Misfire Detected Technical Background © 2023 Audi of America, Inc. Page 1 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin The software needs to be updated. The optimized software will correct the misfire and prevent the MIL from illuminating. Production Solution New software in the control module, -J623- (address word 0001) addressed the condition. Service This TSB replaces Pending Service Solution (PSS) TSB 2054182: PSS 01 3.0 TFSI Bank 2 engine misfires – Q8/Q7 (DCBD engine). SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the ECM, J623 (address word 0001) using the SVM action code as listed in the table below, if necessary: Model Old Target Data Container Number Old Target Data New Target Data Container Version Container Number New Target Data Container Version (or higher) (or higher) MY19 A6/A7 4K0907559A 0007 4K0907559A 0008 MY21 A6/A7 4K0907559K 0001- 0002 4K0907559K 0004 MY20 Q7 4M0907559D 0001- 0003 4M0907559D 0004 MY21 Q7 4M0907559L 0001- 0002 4M0907559L 0003 MY21 Q8 4M8907559M 0001-0002 4M8907559M 0003 MY1920 Q8 4M8907559A 0001- 0003 4M8907559A 0004 SVM Code Input 01A255 Warranty Claim Type: • 110 up to 48 Months/50,000 Miles. • G10 for CPO Covered Vehicles – Verify Owner. © 2023 Audi of America, Inc. Page 2 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin • If the vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 2470 Damage Code: 0039 Labor Operations: Software Update (Includes checking for DTCs) 0151 0000 Time stated on the diagnostic protocol (Max 50 TU) Diagnostic Time: GFF 0150 0000 Max 15 TU Road test prior to the service procedure No allowance 0 TU Road test after the service procedure No allowance 0 TU Claim As per TSB 2069038/4 Comment: All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools Tool Number Tool Description VAS 6160/VAS 6150 VAS tester with the current version of ODIS (Windows 10). Additional Information The following Technical Service Bulletin(s) will be necessary to complete this procedure: • TSB 2011732: 00 Software Version Management (SVM), operating instructions. All part and service references provided in this TSB (2069038) are subject to change and/or removal. ©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. © 2023 Audi of America, Inc. Page 3 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.